Running mainline kernel 4.0.3 (Arch Linux ARM) on a Cubietruck I
recently stumbled upon some systemd journal messages during boot that
seemed possibly related and hence worth posting to me:
> sunxi-mmc 1c12000.mmc: No vqmmc regulator found
> sunxi-mmc 1c12000.mmc: base:0xf011e000 irq:27
> sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
> sr_init: No PMIC hook to init smartreflex
> mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
> mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
> mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
> mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
> mmc1: new high speed SDIO card at address 0001
> sr_init: platform driver register failed for SR
> Unable to find PPMU node
> usbcore: registered new interface driver brcmfmac
> eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
> eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
> brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 \
14:50:00 version 5.90.195.89.6 FWID 01
> brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
> brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
Regarding those letter messages the only reason to post is the fact that
the last three lines were marked red / like warnings (that ISO3166 thing
actually isn't something I'd consider related to the problem discussed
here).
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
