On some nand controllers with hw-ecc the controller code wants to know the ecc strength and size and having these as 0, 0 is not accepted.
Specifying these in devicetree is possible but undesirable as the nand may be different in different production runs of the same board, so it is better to get this info from the nand id where possible. This commit adds code to read the ecc strength and size from the nand for Samsung extended-id nands. This code is based on the info for the 5th id byte in the datasheets for the following Samsung nands: K9GAG08U0E, K9GAG08U0F, K9GAG08X0D, K9GBG08U0A, K9GBG08U0B. These all use these bits in the exact same way. Signed-off-by: Hans de Goede <[email protected]> --- drivers/mtd/nand/nand_base.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 462984a..f3fefbf 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -4059,6 +4059,41 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, mtd->erasesize = (128 * 1024) << (((extid >> 1) & 0x04) | (extid & 0x03)); *busw = 0; + /* Calc ecc strength and size from 5th id byte*/ + switch ((id_data[4] >> 4) & 0x07) { + case 0: + chip->ecc_strength_ds = 1; + chip->ecc_step_ds = 512; + break; + case 1: + chip->ecc_strength_ds = 2; + chip->ecc_step_ds = 512; + break; + case 2: + chip->ecc_strength_ds = 4; + chip->ecc_step_ds = 512; + break; + case 3: + chip->ecc_strength_ds = 8; + chip->ecc_step_ds = 512; + break; + case 4: + chip->ecc_strength_ds = 16; + chip->ecc_step_ds = 512; + break; + case 5: + chip->ecc_strength_ds = 24; + chip->ecc_step_ds = 1024; + break; + case 6: + chip->ecc_strength_ds = 40; + chip->ecc_step_ds = 1024; + break; + case 7: + chip->ecc_strength_ds = 60; + chip->ecc_step_ds = 1024; + break; + } } else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX && !nand_is_slc(chip)) { unsigned int tmp; -- 2.4.3 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
