Hey,
On 12-08-15 14:35, Hans de Goede wrote:
Hi,
On 12-08-15 14:23, Michal Suchanek wrote:
When core does not set the MMC_QUIRK_BROKEN_CLK_GATING flag enable
automatic hardware controlled clock gating on the mmc interface.
Signed-off-by: Michal Suchanek <hramr...@gmail.com>
In general this looks good, but I wonder how intensively this has
been tested ?
It doesn't matter actually, it took some time longer, but the mmc still
craps out even with Michal's 3 patches. I'll revert hans's earlier patch
again and do a bit more extensive testing.
Also given the long latencies when using manual
clock on/off support, have you done any testing to check what
sort of latencies this adds, e.g. Both with and without
the patch, dump all the filesystem caches:
echo 3 > /proc/sys/vm/drop_caches
And then do:
time cat /some/small/file/on/the/sdcard
Do this at least 3 time both with and without the patch, and see
if there are any noticable differences ?
Regards,
Hans
---
drivers/mmc/host/sunxi-mmc.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index f808a02..443cab5 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -601,8 +601,13 @@ static int sunxi_mmc_oclk_onoff(struct
sunxi_mmc_host *host, u32 oclk_en)
rval = mmc_readl(host, REG_CLKCR);
rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON);
- if (oclk_en)
+ if (oclk_en) {
rval |= SDXC_CARD_CLOCK_ON;
+ if (!host->mmc->card ||
+ !(host->mmc->card->quirks & MMC_QUIRK_BROKEN_CLK_GATING))
+
+ rval |= SDXC_LOW_POWER_ON;
+ }
start = jiffies;
end = start + msecs_to_jiffies(750);
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
