The 250ms timeout is too short. On my system enabling the oclk takes under 50ms and disabling slightly over 100ms when idle. Under load disabling the clock can take over 350ms.
This does not make mmc clock gating look like good option to have on sunxi but the system should not crash with mmc clock gating enabled nonetheless. This patch sets the timeout to 750ms. Signed-off-by: Michal Suchanek <[email protected]> --- v3 - remove debug message v2 - fix formatting --- drivers/mmc/host/sunxi-mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index 4d3e1ff..a7b7a67 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -595,7 +595,7 @@ static irqreturn_t sunxi_mmc_handle_manual_stop(int irq, void *dev_id) static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en) { - unsigned long expire = jiffies + msecs_to_jiffies(250); + unsigned long expire = jiffies + msecs_to_jiffies(750); u32 rval; rval = mmc_readl(host, REG_CLKCR); -- 2.1.4 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
