Hello Arend, On Tue, Jan 19, 2016 at 5:20 PM, Arend van Spriel <[email protected]> wrote: > On 19-1-2016 2:30, Vishnu Patekar wrote: >> Hello Arend, >> >> I've A83T BPI-m3 board, which includes AP6212(brcm43430). I'm trying >> to make it work for mainline linux and brcm driver. >> >> After enabling mmc1, It could read vendor: 0x02d0 device: 0xa9a6. from >> /sys/bus/mmc/devices/mmc1:0001/mmc1:0001:1 >> >> BRCM driver loads the firmware files, however, it gives below errors >> and wlan0 is not available: >> >> dmesg | grep brcm >> [ 1.187459] brcmfmac: brcmf_of_probe: interrupt could not be mapped > > Not sure whether this might cause an issue. Could be a devicetree issue.
Yes, it was a device tree issue, it's now fixed. still, it's not working, [ 2.319200] brcmfmac: brcmf_sdio_firmware_callback failed: dev=mmc1:0001:1, err=0 . ..... [ 4.405585] brcmfmac: brcmf_sdio_remove Disconnected detailed log with brcmfmac.debug=30, :http://pastebin.com/PbJYxFhP > > Regards, > Arend > >> [ 1.194419] brcmfmac: F1 signature read @0x18000000=0x1530a9a6 >> [ 1.197807] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive >> strength init done for chip 43430 rev 0 pmurev 24 >> [ 2.310138] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): >> clkctl 0x50 >> [ 3.319433] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): >> clkctl 0x50 >> [ 4.349022] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): >> clkctl 0x50 >> >> >> There are no brcm43430 firmware files at >> http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/brcm >> So, used firmware: >> https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm80211/brcm/brcmfmac43430-sdio.bin >> and .txt. >> >> Could you please help me in this regard ? >> >> >> Regards, >> Vishnu >> -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
