Hi, On 21-01-16 06:26, Chen-Yu Tsai wrote:
According to Allwinner, only mmc3 supports 8 bit DDR transfers for eMMC. Switch to mmc3 for the onboard eMMC, and also assign vqmmc for signal voltage sensing/switching, and "cap-mmc-hw-reset" to denote this instance can use eMMC hardware reset.
This is going to need some more explanation, does this mean that the old dtsi is wrong and the emmc does not work there are all ? Regards, Hans
Signed-off-by: Chen-Yu Tsai <[email protected]> --- arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index ea69fb8ad4d8..4ec0c8679b2e 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -61,12 +61,14 @@ }; /* eMMC on core board */ -&mmc2 { +&mmc3 { pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_emmc_pins>; + pinctrl-0 = <&mmc3_8bit_emmc_pins>; vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; };
-- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
