The sun8i-emac is an ethernet MAC hardware that support 10/100/1000
speed. TODO

This patch enable the sun8i-emac on the Allwinner A20 SoC Device-tree.

Signed-off-by: LABBE Corentin <[email protected]>
---
 arch/arm/boot/dts/sun8i-h3.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 0faa38a..b1d949f 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -500,6 +500,17 @@
                                allwinner,drive = <SUN4I_PINCTRL_30_MA>;
                                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
                        };
+
+                       emac_pins_a: emac0@0 {
+                               allwinner,pins = "PD0", "PD1", "PD2", "PD3",
+                                               "PD4", "PD5", "PD6", "PD7",
+                                               "PD8", "PD9", "PD10", "PD11",
+                                               "PD12", "PD13", "PD14", "PD15",
+                                               "PD16", "PD17";
+                               allwinner,function = "emac";
+                               allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
                };
 
                bus_rst: reset@01c202c0 {
@@ -574,6 +585,16 @@
                        status = "disabled";
                };
 
+               emac: ethernet@1c30000 {
+                       compatible = "allwinner,sun8i-h3-emac";
+                       reg = <0x01c30000 0x1054>;
+                       interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+                       resets = <&bus_rst 17>, <&bus_rst 66>;
+                       reset-names = "ahb", "ephy";
+                       clocks = <&bus_gates 17>, <&bus_gates 128>;
+                       clock-names = "ahb2_gmac", "ahb1_ephy";
+               };
+
                gic: interrupt-controller@01c81000 {
                        compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
                        reg = <0x01c81000 0x1000>,
-- 
2.4.10

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to