Hello
In my case this is the tablet colorfly,s hardware:
-AXP221s D3108CB 6631 (Power Management IC)
-RTL 8188ETV (wifi)- In kernel select:
1-Networking support -->Wireless
2-Device drivers -->Staging drivers--> RTL8188
-Goofix 911 (touchscreen): I have modify suni6-a31s-colorfly-e708.dts
(U-boot,) in order to the goodix gt911 work. Netx calibrate file:
-/usr/share/X11/xorg.conf.d/10-evdev.conf :
Section "InputClass"
Identifier "calibration"
MatchProduct "Goodix Capacitive TouchScreen"
Option "Calibration" "4 1200 800 -1"
Option "SwapAxes" "1"
EndSection.
-XT1208- Voltage regulator
-I29F64G08AAMEI: Internal flash memory 8GB
-ELPIA J4216BBBG-GN-F (HAY DOS ) DDR3 SDRAM 1GB (2x 512MB)
-CHIP??2011M 130927¿¿¿????
Basicaly i have two hardwarware element,s that don,t work:
-Amlogic STK8313 3121D 07B37: Accelerometer, i have seen stk8312.c file but
this driver has I2C 2x3D, stk8312 works on i2c 0x22
kernel/linux-4.6-rc2/drivers/iio/accel ¿any idea how to use or port 8313
module?
-Sound: I don,t kwon how works audio codec
Thanks
J.C
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
