On 30 June 2016 at 20:06, Michal Suchanek <[email protected]> wrote: > Hello, > > On 30 June 2016 at 16:44, Ondřej Jirman <[email protected]> wrote: >> Hi, >> >> hopefuly, it was the NPE that I fixed. It was specifically in the H3 usb >> phy code path for phy0. So I believe it was untested, >> because I didn't find any dts file that would use phy0. >> > > This WorksForMe(TM).
There is still small problem left. When I boot with the USB cable connected I have to disconnect and reconnect the cable to get the gadget working. > >> >> On 30.6.2016 07:17, [email protected] wrote: >>> Nice work. >>> Sure i will try your path, last time i tried otg i had kernel exception >>> when loading musb driver. >>> I would like setup usb otg in device mode as g_ether or cdrom drive >>> emulation to loading bootable iso with gpio sw for iso selection yes i >>> dream :) Actually, the cdrom drive emulation is not out of question. You will need to tune the linux mass storage gadget to identify as CD-rom rather than USB stick. I wanted this for IDE CD-rom. The systems that boot from USB CD-rom usually can do USB stick too. Thanks Michal -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
