On Wed, Oct 12, 2016 at 03:30:07PM +0800, Chen-Yu Tsai wrote:
> Hi,
> On Wed, Oct 12, 2016 at 12:20 PM, Icenowy Zheng <icen...@aosc.xyz> wrote:
> > The PWM controller in A31 is different with other Allwinner SoCs, with a
> > control register per channel (in other SoCs the control register is
> > shared), and each channel are allocated 16 bytes of address (but only 8
> > bytes are used.). The register map in one channel is just like a
> > single-channel A10 PWM controller, however, A31 have a different
> > prescaler table than other SoCs.
> >
> > In order to use the driver for all 4 channels, device nodes should be
> > created per channel.
> I think Maxime wants you to support the different register offsets
> in this driver, and have all 4 channels in the same device (node).



Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering

You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Attachment: signature.asc
Description: PGP signature

Reply via email to