Hi, On 19/03/2017 15:59, Eyad Majali wrote: > Hi, > pwm is configured in dtsi , when the module loads screen brightness > decrease to minimum ( barely sees anything) how to fix that ? > also when i enable pwm-bl it turns off the screen completely , but when > i removed the enable-gpios the result was the same with pwm-sun4i alone but > if i rmmod pwm-bl and then modprobe pwm-bl it will load the default > brightness level correctly > any help is apreciated , Thanks >
I think this patch can help you: https://patchwork.kernel.org/patch/9631655/ Quentin > -- > You received this message because you are subscribed to the Google > Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > For more options, visit https://groups.google.com/d/optout. -- Quentin Schulz, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
