20.03.2017, 00:08, "Quentin Schulz" <[email protected]>: > Hi, > > On 19/03/2017 15:59, Eyad Majali wrote: >> Hi, >> pwm is configured in dtsi , when the module loads screen brightness >> decrease to minimum ( barely sees anything) how to fix that ? >> also when i enable pwm-bl it turns off the screen completely , but when >> i removed the enable-gpios the result was the same with pwm-sun4i alone but >> if i rmmod pwm-bl and then modprobe pwm-bl it will load the default >> brightness level correctly >> any help is apreciated , Thanks > > I think this patch can help you: https://patchwork.kernel.org/patch/9631655/
P.S. are you using 4.11-rc now? This patch only takes effect on 4.11-rc. > > Quentin > >> -- >> You received this message because you are subscribed to the Google >> Groups "linux-sunxi" group. >> To unsubscribe from this group and stop receiving emails from it, send >> an email to [email protected] >> <mailto:[email protected]>. >> For more options, visit https://groups.google.com/d/optout. > > -- > Quentin Schulz, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
