The DDR1 PLL on the A33 is an oddball amongst the A33 CCU clocks.
It is a clock multiplier, with the effective multiplier in the
range of 12 ~ 255 and no offset between the multiplier value and
the value programmed into the register.
Implement the zero offset and minimum value of 12 for this clock.
Fixes: d05c748bd730 ("clk: sunxi-ng: Add A33 CCU support")
Signed-off-by: Chen-Yu Tsai <[email protected]>
---
drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
index a7b3c08ed0e2..56370c2c7f98 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
@@ -159,13 +159,17 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk,
"pll-de",
BIT(28), /* lock */
CLK_SET_RATE_UNGATE);
-/* TODO: Fix N */
-static SUNXI_CCU_N_WITH_GATE_LOCK(pll_ddr1_clk, "pll-ddr1",
- "osc24M", 0x04c,
- 8, 6, /* N */
- BIT(31), /* gate */
- BIT(28), /* lock */
- CLK_SET_RATE_UNGATE);
+static struct ccu_mult pll_ddr1_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 6, 0, 12, 0),
+ .common = {
+ .reg = 0x04c,
+ .hw.init = CLK_HW_INIT("pll-ddr1", "osc24M",
+ &ccu_mult_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
static const char * const cpux_parents[] = { "osc32k", "osc24M",
"pll-cpux" , "pll-cpux" };
--
2.11.0
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
