Hi Andre, Here's the whole log. I am wondering if changing the cpufreq from u-boot has messed it up?
U-Boot SPL 2017.09-dirty (Nov 23 2017 - 20:48:36) > DRAM: 1024 MiB > Trying to boot from MMC1 > NOTICE: BL3-1: Running on H5 (1718) in SRAM A2 (@0x44000) > NOTICE: Configuring SPC Controller > NOTICE: BL3-1: v1.0(debug):91f2402 > NOTICE: BL3-1: Built : 20:35:30, Nov 23 2017 > NOTICE: SCPI: dummy stub handler, implementation level: 000000 > INFO: BL3-1: Initializing runtime services > INFO: BL3-1: Preparing for EL3 exit to normal world > INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9 > > U-Boot 2017.09-dirty (Nov 23 2017 - 20:48:36 +0000) Allwinner Technology > CPU: Allwinner H5 (SUN50I) > Model: OrangePi PC 2 > DRAM: 1 GiB > MMC: SUNXI SD/MMC: 0 > *** Warning - bad CRC, using default environment > In: serial > Out: serial > Err: serial > Net: phy interface7 > eth0: ethernet@1c30000 > starting USB... > USB0: USB EHCI 1.00 > USB1: USB OHCI 1.0 > scanning bus 0 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > Found U-Boot script /boot.scr > 623 bytes read in 61 ms (9.8 KiB/s) > ## Executing script at 4fc00000 > This is your bootloader speaking. > --------------- > All your sunxi are belong to us. > --------------- > booting... > 24017408 bytes read in 101840 ms (229.5 KiB/s) > 14643 bytes read in 95 ms (150.4 KiB/s) > ## Flattened Device Tree blob at 4fa00000 > Booting using the fdt blob at 0x4fa00000 > Loading Device Tree to 0000000049ff9000, end 0000000049fff932 ... OK > Starting kernel ... > [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] > [ 0.000000] Linux version 4.14.0-g5a787756b (chris@sunxi-build) (gcc > version 7.2.0 (Debian 7.2.0-11)) #1 SMP PREEMPT Thu Nov 23 20:25:27 GMT 2017 > [ 0.000000] Machine model: Xunlong Orange Pi PC 2 > [ 0.000000] efi: Getting EFI parameters from FDT: > [ 0.000000] efi: UEFI not found. > [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 > [ 0.000000] NUMA: No NUMA configuration found > [ 0.000000] NUMA: Faking a node at [mem > 0x0000000000000000-0x000000007fffffff] > [ 0.000000] NUMA: NODE_DATA [mem 0x7efe2080-0x7efe3b7f] > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] > [ 0.000000] Normal empty > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] > [ 0.000000] Initmem setup node 0 [mem > 0x0000000040000000-0x000000007fffffff] > [ 0.000000] psci: probing for conduit method from DT. > [ 0.000000] psci: PSCIv0.2 detected in firmware. > [ 0.000000] psci: Using standard PSCI v0.2 function IDs > [ 0.000000] psci: Trusted OS migration not required > [ 0.000000] random: fast init done > [ 0.000000] percpu: Embedded 21 pages/cpu @ffff80003ef87000 s55960 r0 > d30056 u86016 > [ 0.000000] Detected VIPT I-cache on CPU0 > [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: > 258048 > [ 0.000000] Policy zone: DMA > [ 0.000000] Kernel command line: console=ttyS0,115200 noinitrd > root=/dev/mmcblk0p1 rootfstype=ext4 rw rootdelay=5 > [ 0.000000] Memory: 991348K/1048576K available (15100K kernel code, > 1566K rwdata, 5528K rodata, 1216K init, 484K bss, 40844K reserved, 16384K > cma-reserved) > [ 0.000000] Virtual kernel memory layout: > [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( > 128 MB) > [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 > (129022 GB) > [ 0.000000] .text : 0xffff000008080000 - 0xffff000008f40000 ( > 15104 KB) > [ 0.000000] .rodata : 0xffff000008f40000 - 0xffff0000094b0000 ( > 5568 KB) > [ 0.000000] .init : 0xffff0000094b0000 - 0xffff0000095e0000 ( > 1216 KB) > [ 0.000000] .data : 0xffff0000095e0000 - 0xffff000009767a00 ( > 1567 KB) > [ 0.000000] .bss : 0xffff000009767a00 - 0xffff0000097e0d80 ( > 485 KB) > [ 0.000000] fixed : 0xffff7dfffe7fb000 - 0xffff7dfffec00000 ( > 4116 KB) > [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( > 16 MB) > [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( > 2048 GB maximum) > [ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( > 16 MB actual) > [ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( > 1024 MB) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > [ 0.000000] Preemptible hierarchical RCU implementation. > [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. > [ 0.000000] Tasks RCU enabled. > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 > [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > [ 0.000000] GIC: Using split EOI/Deactivate mode > [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). > [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff > max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns > [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every > 4398046511097ns > [ 0.000160] Console: colour dummy device 80x25 > [ 0.000225] Calibrating delay loop (skipped), value calculated using > timer frequency.. 48.00 BogoMIPS (lpj=96000) > [ 0.000237] pid_max: default: 32768 minimum: 301 > [ 0.000319] Security Framework initialized > [ 0.000976] Dentry cache hash table entries: 131072 (order: 8, 1048576 > bytes) > [ 0.001308] Inode-cache hash table entries: 65536 (order: 7, 524288 > bytes) > [ 0.001342] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) > [ 0.001360] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 > bytes) > [ 0.016047] ASID allocator initialised with 65536 entries > [ 0.024032] Hierarchical SRCU implementation. > [ 0.032699] EFI services will not be available. > [ 0.040070] smp: Bringing up secondary CPUs ... > [ 0.069012] Detected VIPT I-cache on CPU1 > [ 0.069072] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] > [ 0.096719] Detected VIPT I-cache on CPU2 > [ 0.096751] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] > [ 0.124721] Detected VIPT I-cache on CPU3 > [ 0.124750] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] > [ 0.124821] smp: Brought up 1 node, 4 CPUs > [ 0.124844] SMP: Total of 4 processors activated. > [ 0.124852] CPU features: detected feature: 32-bit EL0 Support > [ 0.125126] CPU: All CPU(s) started at EL2 > [ 0.125150] alternatives: patching kernel code > [ 0.126181] devtmpfs: initialized > [ 0.129865] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 7645041785100000 ns > [ 0.129923] futex hash table entries: 1024 (order: 5, 131072 bytes) > [ 0.130621] xor: measuring software checksum speed > [ 0.168361] 8regs : 1565.000 MB/sec > [ 0.208412] 8regs_prefetch: 1396.000 MB/sec > [ 0.248464] 32regs : 1925.000 MB/sec > [ 0.288517] 32regs_prefetch: 1618.000 MB/sec > [ 0.288523] xor: using function: 32regs (1925.000 MB/sec) > [ 0.288536] pinctrl core: initialized pinctrl subsystem > [ 0.289966] DMI not present or invalid. > [ 0.290374] NET: Registered protocol family 16 > [ 0.290905] audit: initializing netlink subsys (disabled) > [ 0.291035] audit: type=2000 audit(0.288:1): state=initialized > audit_enabled=0 res=1 > [ 0.292239] cpuidle: using governor menu > [ 0.293027] vdso: 2 pages (1 code @ ffff000008f46000, 1 data @ > ffff0000095e5000) > [ 0.293050] hw-breakpoint: found 6 breakpoint and 4 watchpoint > registers. > [ 0.294386] DMA: preallocated 256 KiB pool for atomic allocations > [ 0.295407] Serial: AMBA PL011 UART driver > [ 0.322335] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages > [ 0.389270] raid6: int64x1 gen() 278 MB/s > [ 0.457275] raid6: int64x1 xor() 301 MB/s > [ 0.525410] raid6: int64x2 gen() 465 MB/s > [ 0.593449] raid6: int64x2 xor() 408 MB/s > [ 0.661528] raid6: int64x4 gen() 709 MB/s > [ 0.729661] raid6: int64x4 xor() 503 MB/s > [ 0.797773] raid6: int64x8 gen() 666 MB/s > [ 0.865911] raid6: int64x8 xor() 506 MB/s > [ 0.933992] raid6: neonx1 gen() 494 MB/s > [ 1.002067] raid6: neonx1 xor() 579 MB/s > [ 1.070164] raid6: neonx2 gen() 796 MB/s > [ 1.138181] raid6: neonx2 xor() 819 MB/s > [ 1.206285] raid6: neonx4 gen() 1026 MB/s > [ 1.274326] raid6: neonx4 xor() 980 MB/s > [ 1.342431] raid6: neonx8 gen() 1132 MB/s > [ 1.410481] raid6: neonx8 xor() 1042 MB/s > [ 1.410488] raid6: using algorithm neonx8 gen() 1132 MB/s > [ 1.410493] raid6: .... xor() 1042 MB/s, rmw enabled > [ 1.410499] raid6: using neon recovery algorithm > [ 1.410960] ACPI: Interpreter disabled. > [ 1.412205] vgaarb: loaded > [ 1.412513] SCSI subsystem initialized > [ 1.413010] usbcore: registered new interface driver usbfs > [ 1.413050] usbcore: registered new interface driver hub > [ 1.413129] usbcore: registered new device driver usb > [ 1.413968] media: Linux media interface: v0.10 > [ 1.414009] Linux video capture interface: v2.00 > [ 1.414232] pps_core: LinuxPPS API ver. 1 registered > [ 1.414240] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo > Giometti <[email protected]> > [ 1.414269] PTP clock support registered > [ 1.414511] EDAC MC: Ver: 3.0.0 > [ 1.414880] dmi: Firmware registration failed. > [ 1.415193] Advanced Linux Sound Architecture Driver Initialized. > [ 1.415624] Bluetooth: Core ver 2.22 > [ 1.415665] NET: Registered protocol family 31 > [ 1.415671] Bluetooth: HCI device and connection manager initialized > [ 1.415685] Bluetooth: HCI socket layer initialized > [ 1.415694] Bluetooth: L2CAP socket layer initialized > [ 1.415720] Bluetooth: SCO socket layer initialized > [ 1.416401] clocksource: Switched to clocksource arch_sys_counter > [ 1.416578] VFS: Disk quotas dquot_6.6.0 > [ 1.416637] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 > bytes) > [ 1.416793] pnp: PnP ACPI: disabled > [ 1.423616] NET: Registered protocol family 2 > [ 1.424181] TCP established hash table entries: 8192 (order: 4, 65536 > bytes) > [ 1.424297] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) > [ 1.424622] TCP: Hash tables configured (established 8192 bind 8192) > [ 1.424770] UDP hash table entries: 512 (order: 2, 16384 bytes) > [ 1.424869] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > [ 1.425034] NET: Registered protocol family 1 > [ 1.425377] RPC: Registered named UNIX socket transport module. > [ 1.425384] RPC: Registered udp transport module. > [ 1.425390] RPC: Registered tcp transport module. > [ 1.425396] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 1.426597] kvm [1]: 8-bit VMID > [ 1.426605] kvm [1]: IDMAP page: 44f2c000 > [ 1.426612] kvm [1]: HYP VA range: 800000000000:ffffffffffff > [ 1.427751] kvm [1]: vgic-v2@1c84000 > [ 1.427833] kvm [1]: vgic interrupt IRQ1 > [ 1.427851] kvm [1]: virtual timer IRQ4 > [ 1.427933] kvm [1]: Hyp mode initialized successfully > [ 1.432779] Initialise system trusted keyrings > [ 1.432945] workingset: timestamp_bits=44 max_order=18 bucket_order=0 > [ 1.440999] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 1.441700] NFS: Registering the id_resolver key type > [ 1.441729] Key type id_resolver registered > [ 1.441735] Key type id_legacy registered > [ 1.441749] nfs4filelayout_init: NFSv4 File Layout Driver Registering... > [ 1.441757] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver > Registering... > [ 1.441938] fuse init (API version 7.26) > [ 1.442450] 9p: Installing v9fs 9p2000 file system support > [ 1.446028] Key type asymmetric registered > [ 1.446044] Asymmetric key parser 'x509' registered > [ 1.446263] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 243) > [ 1.446274] io scheduler noop registered > [ 1.446497] io scheduler cfq registered (default) > [ 1.446505] io scheduler mq-deadline registered > [ 1.446512] io scheduler kyber registered > [ 1.447959] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO > [ 1.451949] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO > driver > [ 1.455455] sun50i-h5-pinctrl 1c20800.pinctrl: initialized sunXi PIO > driver > [ 1.467680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 1.469909] console [ttyS0] disabled > [ 1.490517] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 25, > base_baud = 1500000) is a U6_16550A > [ 2.458453] console [ttyS0] enabled > [ 2.463111] SuperH (H)SCI(F) driver initialized > [ 2.468049] msm_serial: driver initialized > [ 2.479785] cacheinfo: Unable to detect cache hierarchy for CPU 0 > [ 2.492755] loop: module loaded > [ 2.513963] libphy: Fixed MDIO Bus: probed > [ 2.519633] tun: Universal TUN/TAP device driver, 1.6 > [ 2.525674] thunder-xcv, ver 1.0 > [ 2.528986] thunder-BGX, ver 1.0 > [ 2.532241] thunder-nic, ver 1.0 > [ 2.535819] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k > [ 2.541721] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. > [ 2.547692] igb: Intel(R) Gigabit Ethernet Network Driver - version > 5.4.0-k > [ 2.554654] igb: Copyright (c) 2007-2014 Intel Corporation. > [ 2.560264] igbvf: Intel(R) Gigabit Virtual Function Network Driver - > version 2.4.0-k > [ 2.568096] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. > [ 2.574405] sky2: driver version 1.30 > [ 2.579567] dwmac-sun8i 1c30000.ethernet: PTP uses main clock > [ 2.585953] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB > Ethernet driver > [ 2.593402] usbcore: registered new interface driver pegasus > [ 2.599101] usbcore: registered new interface driver rtl8150 > [ 2.604803] usbcore: registered new interface driver r8152 > [ 2.610331] usbcore: registered new interface driver asix > [ 2.615765] usbcore: registered new interface driver ax88179_178a > [ 2.621892] usbcore: registered new interface driver cdc_ether > [ 2.627758] usbcore: registered new interface driver dm9601 > [ 2.633369] usbcore: registered new interface driver CoreChips > [ 2.639235] usbcore: registered new interface driver smsc75xx > [ 2.645014] usbcore: registered new interface driver smsc95xx > [ 2.650795] usbcore: registered new interface driver net1080 > [ 2.656487] usbcore: registered new interface driver plusb > [ 2.662010] usbcore: registered new interface driver cdc_subset > [ 2.667963] usbcore: registered new interface driver zaurus > [ 2.673569] usbcore: registered new interface driver MOSCHIP > usb-ethernet driver > [ 2.681006] usbcore: registered new interface driver cdc_ncm > [ 2.686882] VFIO - User Level meta-driver version: 0.3 > [ 2.693308] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.699849] ehci-pci: EHCI PCI platform driver > [ 2.704337] ehci-platform: EHCI generic platform driver > [ 2.709790] ehci-platform 1c1a000.usb: EHCI Host Controller > [ 2.715391] ehci-platform 1c1a000.usb: new USB bus registered, assigned > bus number 1 > [ 2.723636] ehci-platform 1c1a000.usb: irq 9, io mem 0x01c1a000 > [ 2.744416] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 > [ 2.751165] hub 1-0:1.0: USB hub found > [ 2.754951] hub 1-0:1.0: 1 port detected > [ 2.759544] ehci-orion: EHCI orion driver > [ 2.763747] ehci-exynos: EHCI EXYNOS driver > [ 2.768055] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 2.774258] ohci-pci: OHCI PCI platform driver > [ 2.778756] ohci-platform: OHCI generic platform driver > [ 2.784167] ohci-platform 1c1a400.usb: Generic Platform OHCI controller > [ 2.790843] ohci-platform 1c1a400.usb: new USB bus registered, assigned > bus number 2 > [ 2.798831] ohci-platform 1c1a400.usb: irq 10, io mem 0x01c1a400 > [ 2.869001] hub 2-0:1.0: USB hub found > [ 2.872787] hub 2-0:1.0: 1 port detected > [ 2.877340] ohci-exynos: OHCI EXYNOS driver > [ 2.882172] usbcore: registered new interface driver usb-storage > [ 2.891139] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as > rtc0 > [ 2.897947] sun6i-rtc 1f00000.rtc: RTC enabled > [ 2.902711] i2c /dev entries driver > [ 2.907742] IR NEC protocol handler initialized > [ 2.912286] IR RC5(x/sz) protocol handler initialized > [ 2.917344] IR RC6 protocol handler initialized > [ 2.921877] IR JVC protocol handler initialized > [ 2.926409] IR Sony protocol handler initialized > [ 2.931027] IR SANYO protocol handler initialized > [ 2.935732] IR Sharp protocol handler initialized > [ 2.940436] IR MCE Keyboard/mouse protocol handler initialized > [ 2.946267] IR XMP protocol handler initialized > [ 2.953637] Bluetooth: HCI UART driver ver 2.3 > [ 2.958141] Bluetooth: HCI UART protocol LL registered > [ 2.963881] sdhci: Secure Digital Host Controller Interface driver > [ 2.970073] sdhci: Copyright(c) Pierre Ossman > [ 2.974693] Synopsys Designware Multimedia Card Interface Driver > [ 2.982523] sun50i-h5-pinctrl 1c20800.pinctrl: pin PF6 already > requested by 1c0f000.mmc; cannot claim for 1c20800.pinctrl:166 > [ 2.993845] sun50i-h5-pinctrl 1c20800.pinctrl: pin-166 > (1c20800.pinctrl:166) status -22 > [ 3.002001] sunxi-mmc: probe of 1c0f000.mmc failed with error -22 > [ 3.008495] sdhci-pltfm: SDHCI platform and OF driver helper > [ 3.015786] ledtrig-cpu: registered to indicate activity on CPUs > [ 3.022992] usbcore: registered new interface driver usbhid > [ 3.028587] usbhid: USB HID core driver > [ 3.035457] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) > [ 3.041987] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 3.048132] NET: Registered protocol family 10 > [ 3.053250] Segment Routing with IPv6 > [ 3.056994] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 3.062828] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > [ 3.069314] NET: Registered protocol family 17 > [ 3.073824] Bridge firewalling registered > [ 3.077844] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > [ 3.083774] Bluetooth: HIDP socket layer initialized > [ 3.088791] 8021q: 802.1Q VLAN Support v1.8 > [ 3.093026] 9pnet: Installing 9P2000 support > [ 3.097363] Key type dns_resolver registered > [ 3.102462] registered taskstats version 1 > [ 3.106570] Loading compiled-in X.509 certificates > [ 3.112615] Btrfs loaded, crc32c=crc32c-arm64-ce > [ 3.125341] dwmac-sun8i 1c30000.ethernet: PTP uses main clock > [ 3.236464] dwmac-sun8i 1c30000.ethernet: Current syscon value is not > the default 50006 (expect 58000) > [ 3.245782] dwmac-sun8i 1c30000.ethernet: Chain mode enabled > [ 3.251446] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register > supported > [ 3.258667] dwmac-sun8i 1c30000.ethernet: Normal descriptors > [ 3.264328] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine > supported > [ 3.271549] dwmac-sun8i 1c30000.ethernet: COE Type 2 > [ 3.276517] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion > supported > [ 3.283431] libphy: stmmac: probed > [ 3.287434] dwmac-sun8i 1c30000.ethernet: Found internal PHY node > [ 3.293616] libphy: mdio_mux: probed > [ 3.297216] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY > [ 3.303575] dwmac-sun8i 1c30000.ethernet: Powering internal PHY > [ 3.310054] libphy: mdio_mux: probed > [ 3.313651] dwmac-sun8i 1c30000.ethernet: Switch mux to external PHY > [ 3.321921] ehci-platform 1c1b000.usb: EHCI Host Controller > [ 3.327528] ehci-platform 1c1b000.usb: new USB bus registered, assigned > bus number 3 > [ 3.335341] alloc_contig_range: [7f044, 7f045) PFNs busy > [ 3.340750] alloc_contig_range: [7f044, 7f045) PFNs busy > [ 3.346144] alloc_contig_range: [7f044, 7f045) PFNs busy > [ 3.351570] ehci-platform 1c1b000.usb: irq 11, io mem 0x01c1b000 > [ 3.372418] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 > [ 3.379159] hub 3-0:1.0: USB hub found > [ 3.382946] hub 3-0:1.0: 1 port detected > [ 3.388572] ehci-platform 1c1c000.usb: EHCI Host Controller > [ 3.394175] ehci-platform 1c1c000.usb: new USB bus registered, assigned > bus number 4 > [ 3.401976] alloc_contig_range: [7f044, 7f045) PFNs busy > [ 3.407390] alloc_contig_range: [7f044, 7f045) PFNs busy > [ 3.412778] alloc_contig_range: [7f044, 7f045) PFNs busy > [ 3.418204] ehci-platform 1c1c000.usb: irq 13, io mem 0x01c1c000 > [ 3.436418] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 > [ 3.443123] hub 4-0:1.0: USB hub found > [ 3.446908] hub 4-0:1.0: 1 port detected > [ 3.452547] ehci-platform 1c1d000.usb: EHCI Host Controller > [ 3.458146] ehci-platform 1c1d000.usb: new USB bus registered, assigned > bus number 5 > [ 3.465945] alloc_contig_range: [7f044, 7f045) PFNs busy > [ 3.471354] alloc_contig_range: [7f044, 7f045) PFNs busy > [ 3.476746] alloc_contig_range: [7f044, 7f045) PFNs busy > [ 3.482175] ehci-platform 1c1d000.usb: irq 15, io mem 0x01c1d000 > [ 3.500415] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00 > [ 3.507112] hub 5-0:1.0: USB hub found > [ 3.510897] hub 5-0:1.0: 1 port detected > [ 3.516508] ohci-platform 1c1b400.usb: Generic Platform OHCI controller > [ 3.523148] ohci-platform 1c1b400.usb: new USB bus registered, assigned > bus number 6 > [ 3.530945] alloc_contig_range: [7f044, 7f045) PFNs busy > [ 3.536440] ohci-platform 1c1b400.usb: irq 12, io mem 0x01c1b400 > [ 3.605054] hub 6-0:1.0: USB hub found > [ 3.608845] hub 6-0:1.0: 1 port detected > [ 3.614430] ohci-platform 1c1c400.usb: Generic Platform OHCI controller > [ 3.621084] ohci-platform 1c1c400.usb: new USB bus registered, assigned > bus number 7 > [ 3.629055] ohci-platform 1c1c400.usb: irq 14, io mem 0x01c1c400 > [ 3.697060] hub 7-0:1.0: USB hub found > [ 3.700844] hub 7-0:1.0: 1 port detected > [ 3.706447] ohci-platform 1c1d400.usb: Generic Platform OHCI controller > [ 3.713094] ohci-platform 1c1d400.usb: new USB bus registered, assigned > bus number 8 > [ 3.721086] ohci-platform 1c1d400.usb: irq 16, io mem 0x01c1d400 > [ 3.789040] hub 8-0:1.0: USB hub found > [ 3.792824] hub 8-0:1.0: 1 port detected > [ 3.797666] input: r-gpio-keys as > /devices/platform/r-gpio-keys/input/input0 > [ 3.805006] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 > 00:01:54 UTC (114) > [ 3.813227] cfg80211: Loading compiled-in X.509 certificates for > regulatory database > [ 3.822418] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' > [ 3.829039] platform regulatory.0: Direct firmware load for > regulatory.db failed with error -2 > [ 3.836544] vcc3v3: disabling > [ 3.836550] usb0-vbus: disabling > [ 3.836552] ALSA device list: > [ 3.836554] No soundcards found. > [ 3.850227] cfg80211: failed to load regulatory.db > [ 3.855443] Waiting 5 sec before mounting root device... > [ 8.928589] VFS: Cannot open root device "mmcblk0p1" or > unknown-block(0,0): error -6 > [ 8.936340] Please append a correct "root=" boot option; here are the > available partitions: > [ 8.944705] Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(0,0) > [ 8.952960] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-g5a787756b > #1 > [ 8.959822] Hardware name: Xunlong Orange Pi PC 2 (DT) > [ 8.964950] Call trace: > [ 8.967405] dump_backtrace+0x0/0x190 > [ 8.971065] show_stack+0x14/0x20 > [ 8.974379] dump_stack+0x9c/0xbc > [ 8.977692] panic+0x11c/0x290 > [ 8.980746] mount_block_root+0x190/0x264 > [ 8.984750] mount_root+0x11c/0x134 > [ 8.988233] prepare_namespace+0x12c/0x174 > [ 8.992324] kernel_init_freeable+0x200/0x224 > [ 8.996677] kernel_init+0x10/0x100 > [ 9.000162] ret_from_fork+0x10/0x18 > [ 9.003737] SMP: stopping secondary CPUs > [ 9.007656] Kernel Offset: disabled > [ 9.011139] CPU features: 0x002004 > [ 9.014534] Memory Limit: none > [ 9.017589] ---[ end Kernel panic - not syncing: VFS: Unable to mount > root fs on unknown-block(0,0) > [ 19.528424] WARNING: CPU: 0 PID: 8 at kernel/irq_work.c:68 > irq_work_queue_on+0x110/0x128 > [ 19.536505] CPU: 0 PID: 8 Comm: rcu_preempt Not tainted > 4.14.0-g5a787756b #1 > [ 19.543540] Hardware name: Xunlong Orange Pi PC 2 (DT) > [ 19.548669] task: ffff80003d9de200 task.stack: ffff000008068000 > [ 19.554580] pstate: 20000085 (nzCv daIf -PAN -UAO) > [ 19.559367] pc : irq_work_queue_on+0x110/0x128 > [ 19.563807] lr : rcu_implicit_dynticks_qs+0x2b8/0x2e8 > [ 19.568849] sp : ffff00000806bd30 > [ 19.572158] x29: ffff00000806bd30 x28: ffff00000960a880 > [ 19.577465] x27: 0000000000000001 x26: 0000000000000000 > [ 19.582771] x25: ffff0000095eab48 x24: ffff00000812d740 > [ 19.588078] x23: 0000000000000001 x22: ffff0000095ead78 > [ 19.593384] x21: ffff80003efa9480 x20: 0000000000000a42 > [ 19.598691] x19: ffff00000960a880 x18: 0000000000000010 > [ 19.603997] x17: 0000000000000001 x16: 00000000000003ff > [ 19.609303] x15: 0000000000000000 x14: 0000000000000400 > [ 19.614609] x13: 0000000000000000 x12: 0000000000000000 > [ 19.619915] x11: 0000000000000001 x10: 0000000000000a00 > [ 19.625221] x9 : 00008000359d7000 x8 : 0000000000000019 > [ 19.630527] x7 : 0000000000000001 x6 : ffff0000095e7000 > [ 19.635833] x5 : 0000000000000002 x4 : 0000000000000000 > [ 19.641140] x3 : ffff0000095ead68 x2 : 0000000000000000 > [ 19.646445] x1 : 0000000000000001 x0 : ffff80003efa95e0 > [ 19.651751] Call trace: > [ 19.654197] irq_work_queue_on+0x110/0x128 > [ 19.658289] rcu_implicit_dynticks_qs+0x2b8/0x2e8 > [ 19.662987] force_qs_rnp+0x144/0x1d0 > [ 19.666645] rcu_gp_kthread+0x468/0x790 > [ 19.670477] kthread+0x128/0x130 > [ 19.673701] ret_from_fork+0x10/0x18 > [ 19.677270] ---[ end trace 00e4bb0d8d93413c ]--- On 24 November 2017 at 08:55, Andre Przywara <[email protected]> wrote: > Hi Chris, > > On 23/11/17 20:56, Chris Obbard wrote: > > hi guys, > > > > had a bit of time to debug this tonight. here's my environment: > > > > u-boot v2017.09 with lower-default-cpufreq-H5.path applied. > > > > linux mainline, modules built-in, no ramdisk > > > > it's like it doesn't find the SD card, for whatever reason. > > Can you please dump the whole kernel log? It would be good to see what > the MMC driver has to say and whether there are other issues (pinctrl? > clocks?) > > Cheers, > Andre. > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
