Hi, adding Maxime.
On 24/11/17 12:15, Chris Obbard wrote: > Hi andre, > > I used the orange pi pc2 dt from mainline. Which hasn’t changed a while... > > I’ll try to find the commit I used that found the sd card from last > week when I’m home.... Mmh, I guess it's related to: commit 1396007286b1e2fd5dd10ae6a5ccaaaed51ab762 Author: Maxime Ripard <[email protected]> Date: Mon Oct 9 22:53:39 2017 +0200 pinctrl: sunxi: Enforce the strict mode by default This is probably due to the fact that we reference PF6 twice: arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts: > &mmc0 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; Once here: ^^^^^^^^^^^^^^ > vmmc-supply = <®_vcc3v3>; > bus-width = <4>; > cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ And then again here: ^^^^^^^^ > status = "okay"; > }; Maxime, can you say which one should stay? Cheers, Andre. > On Fri, 24 Nov 2017 at 12:13, Andre Przywara <[email protected] > <mailto:[email protected]>> wrote: > > Hi, > > On 24/11/17 11:58, Chris Obbard wrote: > > [ 2.982523] sun50i-h5-pinctrl 1c20800.pinctrl: pin PF6 already > > requested by 1c0f000.mmc; cannot claim for 1c20800.pinctrl:166 > > [ 2.993845] sun50i-h5-pinctrl 1c20800.pinctrl: pin-166 > > (1c20800.pinctrl:166) status -22 > > [ 3.002001] sunxi-mmc: probe of 1c0f000.mmc failed with error -22 > > Did you change anything in the DT? > Which DT do you actually use? Can you dump it here as well? > > I will try it later tonight at home. > > Cheers, > Andre. > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
