The Allwinner A64 SoC features two PWM controllers, which are fully
compatible to the one used in the A13 and H3 chips.
Add the respective device nodes (one for the "normal" PWM, the other for
the one in the CPUS domain) and the pin their output is connected to.
On the A64 the "normal" PWM is muxed together with one of the MDIO pins
used to communicate with the Ethernet PHY, so it won't be usable on many
boards. But the Pinebook laptop uses this pin for controlling the LCD
backlight.
The CPUS PWM pin however is routed to the "RPi2" header, at the same
location as the PWM pin on the RaspberryPi.

Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 28 +++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi 
b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index d783d164b9c3..5dd89d19f744 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -321,6 +321,11 @@
                                bias-pull-up;
                        };
 
+                       pwm_pin: pwm_pin {
+                               pins = "PD22";
+                               function = "pwm";
+                       };
+
                        rmii_pins: rmii_pins {
                                pins = "PD10", "PD11", "PD13", "PD14", "PD17",
                                       "PD18", "PD19", "PD20", "PD22", "PD23";
@@ -537,6 +542,15 @@
                        #interrupt-cells = <3>;
                };
 
+               pwm: pwm@1C21400 {
+                       compatible = "allwinner,sun50i-a64-pwm",
+                                    "allwinner,sun5i-a13-pwm";
+                       reg = <0x01c21400 0x400>;
+                       clocks = <&osc24M>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+
                rtc: rtc@1f00000 {
                        compatible = "allwinner,sun6i-a31-rtc";
                        reg = <0x01f00000 0x54>;
@@ -563,6 +577,15 @@
                        #reset-cells = <1>;
                };
 
+               r_pwm: pwm@1f03800 {
+                       compatible = "allwinner,sun50i-a64-pwm",
+                                    "allwinner,sun5i-a13-pwm";
+                       reg = <0x01f03800 0x400>;
+                       clocks = <&osc24M>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+
                r_pio: pinctrl@1f02c00 {
                        compatible = "allwinner,sun50i-a64-r-pinctrl";
                        reg = <0x01f02c00 0x400>;
@@ -578,6 +601,11 @@
                                pins = "PL0", "PL1";
                                function = "s_rsb";
                        };
+
+                       r_pwm_pin: pwm {
+                               pins = "PL10";
+                               function = "s_pwm";
+                       };
                };
 
                r_rsb: rsb@1f03400 {
-- 
2.14.1

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to