Based on the information from hardware schematics and orangepi vendor orangepi H6 boards, One Plus and Lite2 shares common nodes like axp805, uart, mmc0 etc. The common differences between them is - One Plus, has Ethernet - Lite2, has Wifi, USB3, CSI port.
So, add common orangepi nodes into sun50i-h6-orangepi.dtsi so-that it case use on respective orangepi h6 board dts files. Cc: zhaoyifan <[email protected]> Signed-off-by: Jagan Teki <[email protected]> --- Changes for v2: - Add proper commit message about vendor intention on board differences. .../allwinner/sun50i-h6-orangepi-one-plus.dts | 140 +--------------- .../dts/allwinner/sun50i-h6-orangepi.dtsi | 150 ++++++++++++++++++ 2 files changed, 151 insertions(+), 139 deletions(-) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts index 0612c19cd994..12e17567ab56 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts @@ -4,147 +4,9 @@ * Author: Jagan Teki <[email protected]> */ -/dts-v1/; - -#include "sun50i-h6.dtsi" - -#include <dt-bindings/gpio/gpio.h> +#include "sun50i-h6-orangepi.dtsi" / { model = "OrangePi One Plus"; compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_cldo1>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; - bus-width = <4>; - status = "okay"; -}; - -&r_i2c { - status = "okay"; - - axp805: pmic@36 { - compatible = "x-powers,axp805", "x-powers,axp806"; - reg = <0x36>; - interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - x-powers,self-working-mode; - - regulators { - reg_aldo1: aldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pl"; - }; - - reg_aldo2: aldo2 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-ac200"; - }; - - reg_aldo3: aldo3 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc25-dram"; - }; - - reg_bldo1: bldo1 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-bias-pll"; - }; - - reg_bldo2: bldo2 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-efuse-pcie-hdmi-io"; - }; - - reg_bldo3: bldo3 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc-dcxoio"; - }; - - bldo4 { - /* unused */ - }; - - reg_cldo1: cldo1 { - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-3v3"; - }; - - reg_cldo2: cldo2 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi-1"; - }; - - reg_cldo3: cldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi-2"; - }; - - reg_dcdca: dcdca { - regulator-always-on; - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1080000>; - regulator-name = "vdd-cpu"; - }; - - reg_dcdcc: dcdcc { - regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1080000>; - regulator-name = "vdd-gpu"; - }; - - reg_dcdcd: dcdcd { - regulator-always-on; - regulator-min-microvolt = <960000>; - regulator-max-microvolt = <960000>; - regulator-name = "vdd-sys"; - }; - - reg_dcdce: dcdce { - regulator-always-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-name = "vcc-dram"; - }; - - sw { - /* unused */ - }; - }; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_ph_pins>; - status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi new file mode 100644 index 000000000000..0612c19cd994 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2018 Amarula Solutions + * Author: Jagan Teki <[email protected]> + */ + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi One Plus"; + compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&r_i2c { + status = "okay"; + + axp805: pmic@36 { + compatible = "x-powers,axp805", "x-powers,axp806"; + reg = <0x36>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + x-powers,self-working-mode; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ac200"; + }; + + reg_aldo3: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc25-dram"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-bias-pll"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-efuse-pcie-hdmi-io"; + }; + + reg_bldo3: bldo3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dcxoio"; + }; + + bldo4 { + /* unused */ + }; + + reg_cldo1: cldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdcc: dcdcc { + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1080000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <960000>; + regulator-max-microvolt = <960000>; + regulator-name = "vdd-sys"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dram"; + }; + + sw { + /* unused */ + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; -- 2.18.0.321.gffc6fa0e3 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
