The Orange Pi Lite 2 and Orange Pi One Plus both have two LEDs, one red and one green. These are driven directly by GPIO lines in an active high arrangement. The red LED is labeled "power", so it is set to be on by default.
Note that the default drive current for the GPIO lines makes the LEDs very bright. Signed-off-by: Chen-Yu Tsai <[email protected]> --- .../boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index f16b7ffbe797..b2526dac2fcf 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -22,6 +22,21 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + + power { + label = "orangepi:red:power"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + default-state = "on"; + }; + + status { + label = "orangepi:green:status"; + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; + }; + reg_vcc5v: vcc5v { /* board wide 5V supply directly from the DC jack */ compatible = "regulator-fixed"; -- 2.19.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
