On Tue, Nov 20, 2018 at 02:53:08PM +0800, Chen-Yu Tsai wrote: > Hi, > > This small series enables USB 2.0 and LEDs on the Orange Pi Lite 2 and > Orange Pi One Plus. The two features are unrelated, but included in the > same series as the patch contexts overlap. > > Patch one adds a fixed regulator to represent the board-wide 5V rail. > While not strictly necessary, this helps define the relationship between > regulators. > > Patch two enables USB 2.0 host and OTG. Note that VBUS on both ports are > directly tied to the 5V rail, without any power switches or current > limiters. > > Patch three add device nodes for the two LEDs. These LEDs are driven > directly by the GPIO pins, without a current limiting resistor. At the > default drive strength, the LEDs are quite bright.
Applied all three patches, thanks! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
signature.asc
Description: PGP signature
