New device tree bindings called the source clock of the module "mod" when several clocks are defined.
Try to get a clock called "mod" if nothing is found try to get an unnamed clock. Reviewed-by: Uwe Kleine-König <[email protected]> Signed-off-by: Clément Péron <[email protected]> --- drivers/pwm/pwm-sun4i.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c index e353a03ec614..369990ae7d09 100644 --- a/drivers/pwm/pwm-sun4i.c +++ b/drivers/pwm/pwm-sun4i.c @@ -362,9 +362,34 @@ static int sun4i_pwm_probe(struct platform_device *pdev) if (IS_ERR(pwm->base)) return PTR_ERR(pwm->base); - pwm->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(pwm->clk)) + /* + * All hardware variants need a source clock that is divided and + * then feeds the counter that defines the output wave form. In the + * device tree this clock is either unnamed or called "mod". + * Some variants (e.g. H6) need another clock to access the + * hardware registers; this is called "bus". + * So we request "mod" first (and ignore the corner case that a + * parent provides a "mod" clock while the right one would be the + * unnamed one of the PWM device) and if this is not found we fall + * back to the first clock of the PWM. + */ + pwm->clk = devm_clk_get_optional(&pdev->dev, "mod"); + if (IS_ERR(pwm->clk)) { + if (PTR_ERR(pwm->rst) != -EPROBE_DEFER) + dev_err(&pdev->dev, "get mod clock failed %pe\n", + pwm->clk); return PTR_ERR(pwm->clk); + } + + if (!pwm->clk) { + pwm->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pwm->clk)) { + if (PTR_ERR(pwm->rst) != -EPROBE_DEFER) + dev_err(&pdev->dev, "get unnamed clock failed %pe\n", + pwm->clk); + return PTR_ERR(pwm->clk); + } + } pwm->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL); if (IS_ERR(pwm->rst)) { -- 2.20.1 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20191121195902.6906-3-peron.clem%40gmail.com.
