Hi Maxime,
On Mon, 20 Apr 2020 at 16:30, Clément Péron <[email protected]> wrote:
>
> We define cooling-cells property for CPUs only for board including
> the sun50i-h6-cpu-opp.dtsi. As not all boards have the CPU OPP
> dtsi file included this create a warning because the cooling-maps
> is defined but not the cooling-cells property in CPU nodes.
This fix some warnings introduced by the H6 DVFS serie that I sent last week...
The cooling-cells has been introduced in
7e4bbf3fe67c ("arm64: dts: allwinner: h6: Add CPU Operating
Performance Points table")
instead of
5fc0928782e9 ("arm64: dts: allwinner: h6: Add thermal trip points/cooling map")
Do you plan to squash it? If yes do you want me to sent two patches
separately (it will be a bit easier to squash them)?
Regards,
Clement
>
> Move the cooling-cells to the sun50i-h6.dtsi instead of the
> sun50i-h6-cpu-opp.dtsi
>
> Signed-off-by: Clément Péron <[email protected]>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi | 4 ----
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 4 ++++
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
> index 9ebd97b04b1a..dcb789519797 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
> @@ -102,20 +102,16 @@
>
> &cpu0 {
> operating-points-v2 = <&cpu_opp_table>;
> - #cooling-cells = <2>;
> };
>
> &cpu1 {
> operating-points-v2 = <&cpu_opp_table>;
> - #cooling-cells = <2>;
> };
>
> &cpu2 {
> operating-points-v2 = <&cpu_opp_table>;
> - #cooling-cells = <2>;
> };
>
> &cpu3 {
> operating-points-v2 = <&cpu_opp_table>;
> - #cooling-cells = <2>;
> };
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index 83e32f9c4977..2e31632c6ca8 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -27,6 +27,7 @@
> enable-method = "psci";
> clocks = <&ccu CLK_CPUX>;
> clock-latency-ns = <244144>; /* 8 32k periods */
> + #cooling-cells = <2>;
> };
>
> cpu1: cpu@1 {
> @@ -36,6 +37,7 @@
> enable-method = "psci";
> clocks = <&ccu CLK_CPUX>;
> clock-latency-ns = <244144>; /* 8 32k periods */
> + #cooling-cells = <2>;
> };
>
> cpu2: cpu@2 {
> @@ -45,6 +47,7 @@
> enable-method = "psci";
> clocks = <&ccu CLK_CPUX>;
> clock-latency-ns = <244144>; /* 8 32k periods */
> + #cooling-cells = <2>;
> };
>
> cpu3: cpu@3 {
> @@ -54,6 +57,7 @@
> enable-method = "psci";
> clocks = <&ccu CLK_CPUX>;
> clock-latency-ns = <244144>; /* 8 32k periods */
> + #cooling-cells = <2>;
> };
> };
>
> --
> 2.20.1
>
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/linux-sunxi/CAJiuCccZ6OJXYBZiCnO4VmOQ2WB0CwOsVe6oaU-t5_iiovLzWw%40mail.gmail.com.
