From: Sertac TULLUK <stul...@gmail.com>

Drejo DS167 is an Allwinner A20 based IoT device,
which support
- Allwinner A20 Cortex-A7
- Mali-400MP2 GPU
- AXP209 PMIC
- 1GB DDR3 RAM
- 8GB eMMC
- 10/100M Ethernet
- SATA
- HDMI
- 10.1inch and 7.0inch LVDS LCD and Touch screens
- CSI: OV5640 sensor
- USB OTG
- 2x USB2.0
- built-in KNX Transceiver
- 3x Dry Contact Input
- 3x Relay output
- IR RX/TX
- UART3
- SPI1
- RTC Battery
- 8x GPIO
- Analogue + Digital Microphone
- PAM8620 speaker Amplifier
- 12V DC power supply
- 3.7V Battery Operable

Signed-off-by: Sertac TULLUK <stul...@gmail.com>
---
 arch/arm/boot/dts/Makefile                    |   2 +
 .../boot/dts/sun7i-a20-drejo-ds167-emmc.dts   |  69 +++++
 arch/arm/boot/dts/sun7i-a20-drejo-ds167.dts   | 288 ++++++++++++++++++
 3 files changed, 359 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-drejo-ds167-emmc.dts
 create mode 100644 arch/arm/boot/dts/sun7i-a20-drejo-ds167.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3823090d07e7..d81e685dee38 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1097,6 +1097,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
        sun7i-a20-bananapro.dtb \
        sun7i-a20-cubieboard2.dtb \
        sun7i-a20-cubietruck.dtb \
+       sun7i-a20-drejo-ds167.dtb \
+        sun7i-a20-drejo-ds167-emmc.dtb \
        sun7i-a20-hummingbird.dtb \
        sun7i-a20-itead-ibox.dtb \
        sun7i-a20-i12-tvbox.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-drejo-ds167-emmc.dts 
b/arch/arm/boot/dts/sun7i-a20-drejo-ds167-emmc.dts
new file mode 100644
index 000000000000..b6147eb013b0
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-drejo-ds167-emmc.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2020 Sertac TULLUK
+ *
+ * Sertac TULLUK <stul...@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun7i-a20-drejo-ds167.dts"
+
+/ {
+       model = "drejo DS167-eMMC";
+       compatible = "drejo,sun7i-a20-drejo-ds167-emmc", "allwinner,sun7i-a20";
+
+       mmc2_pwrseq: pwrseq {
+               compatible = "mmc-pwrseq-emmc";
+               reset-gpios = <&pio 2 24 GPIO_ACTIVE_LOW>;
+       };
+};
+
+&mmc2 {
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       non-removable;
+       mmc-pwrseq = <&mmc2_pwrseq>;
+       status = "okay";
+
+       emmc: emmc@0 {
+               reg = <0>;
+               compatible = "mmc-card";
+               broken-hpi;
+       };
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-drejo-ds167.dts 
b/arch/arm/boot/dts/sun7i-a20-drejo-ds167.dts
new file mode 100644
index 000000000000..79db92f88251
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-drejo-ds167.dts
@@ -0,0 +1,288 @@
+/*
+ * Copyright 2020 Sertac TULLUK
+ *
+ * Sertac TULLUK <stul...@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       model = "drejo DS167";
+       compatible = "drejo,sun7i-a20-drejo-ds167", "allwinner,sun7i-a20";
+
+       aliases {
+               serial0 = &uart0;
+               serial1 = &uart3;
+
+               spi0 = &spi1;
+               spi1 = &spi2;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_ds167>;
+
+               red {
+                       label = "ds167-status";
+                       gpios = <&pio 8 9 GPIO_ACTIVE_LOW>;  /* PI9 STATUS LED 
NEAR A20 SERTAC */
+                       default-state = "on";
+               };
+       };
+};
+
+&ahci {
+       target-supply = <&reg_ahci_5v>;
+       status = "okay";
+};
+
+&codec {
+       status = "okay";
+};
+
+&cpu0 {
+       cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+       status = "okay";
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&gmac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+       phy-handle = <&phy1>;
+       phy-mode = "mii";
+       status = "okay";
+};
+
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
+&i2c0 {
+       status = "okay";
+
+       axp209: pmic@34 {
+               reg = <0x34>;
+               interrupt-parent = <&nmi_intc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&lradc {
+       vref-supply = <&reg_vcc3v0>;
+       status = "okay";
+};
+
+&gmac_mdio {
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
+
+&mmc0 {
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&otg_sram {
+       status = "okay";
+};
+
+&pio {
+       gmac_txerr: gmac-txerr-pin {
+               pins = "PA17";
+               function = "gmac";
+       };
+
+       led_pins_ds167: led-pins {  
+               pins = "PI9";   /* Status led, on schematic, this is LED_EN */
+               function = "gpio_out";
+               drive-strength = <20>;
+       };
+};
+
+&pwm {
+      pinctrl-names = "default";
+      pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>;
+      status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+       status = "okay";
+};
+
+&battery_power_supply {
+       status = "okay";
+};
+
+&reg_dcdc2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+       regulator-always-on;
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "avcc";
+};
+
+&reg_ahci_5v {
+       status = "okay";
+};
+
+&reg_usb0_vbus {
+       status = "okay";
+};
+
+&reg_usb1_vbus {
+       status = "okay";
+};
+
+&reg_usb2_vbus {
+       status = "okay";
+};
+
+&spi1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi1_pi_pins>,
+                   <&spi1_cs0_pi_pin>;
+       status = "okay";
+};
+
+&spi2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi2_pc_pins>,
+                   <&spi2_cs0_pc_pin>;
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pb_pins>;
+       status = "okay";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pg_pins>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usb_power_supply {
+       status = "okay";
+};
+
+&usbphy {
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* 
PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; 
/* PH5 */
+       usb0_vbus-supply = <&reg_usb0_vbus>;
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       usb2_vbus-supply = <&reg_usb2_vbus>;
+       status = "okay";
+};
-- 
2.17.1

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/linux-sunxi/20200531110538.30153-1-stulluk%40gmail.com.

Reply via email to