Hi, a collection of DT fixes I gathered over time:
- Adding usbphy references to [EO]HCI0 nodes (A64, H6) - Adding Pine64-LTS status LED - Dropping non-removable from SoPine/Pine64-LTS SD card - Enabling HS200 @ 150 MHz on Pine H64 (H6) - Enabling HS200 @ 150 MHz on Pine64-LTS For details please see the individual patches! Thanks, Andre Andre Przywara (7): arm64: dts: allwinner: H6/A64: properly connect USB PHY to port 0 arm64: dts: allwinner: Pine64-LTS: Add status LED arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card arm64: dts: allwinner: H6: Allow up to 150 MHz MMC bus frequency arm64: dts: allwinner: A64: Limit MMC2 bus frequency to 150 MHz arm64: dts: allwinner: Pine64-LTS/SoPine: Enable HS200 eMMC mode arm64: dts: allwinner: Pine H64: Enable HS200 eMMC mode .../boot/dts/allwinner/sun50i-a64-pine64-lts.dts | 11 +++++++++++ arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 5 +---- .../dts/allwinner/sun50i-a64-sopine-baseboard.dts | 1 + arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 1 - arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 6 +++++- arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 1 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 7 +++++++ 7 files changed, 26 insertions(+), 6 deletions(-) -- 2.17.5 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20210106150525.15403-1-andre.przywara%40arm.com.
