In recent Allwinner SoCs the first USB host controller (HCI0) shares the first PHY with the MUSB controller. Probably to make this sharing work, we were avoiding to declare this in the DT. This has two shortcomings: - U-Boot (which uses the same .dts) cannot use this port in host mode without a PHY linked, so we were loosing one USB port there. - It requires the MUSB driver to be enabled and loaded, although we don't actually use it.
To avoid those issues, let's add this PHY link to the A64 and H6 .dtsi files. After all PHY port 0 *is* connected to HCI0, so we should describe it as this. Remove the part from the boards which were already doing that. This makes it work in U-Boot, also improves compatiblity when no MUSB driver is loaded (for instance in distribution installers). Signed-off-by: Andre Przywara <[email protected]> --- arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 4 ---- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 4 ++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 4 ++++ 3 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 896f34fd9fc3..d07cf05549c3 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -126,8 +126,6 @@ }; &ehci0 { - phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; @@ -177,8 +175,6 @@ }; &ohci0 { - phys = <&usbphy 0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 51cc30e84e26..19e9b8ca8432 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -593,6 +593,8 @@ <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>, <&ccu RST_BUS_EHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -603,6 +605,8 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; + phys = <&usbphy 0>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 8a62a9fbe347..f593cfeaecc9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -680,6 +680,8 @@ <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>, <&ccu RST_BUS_EHCI0>; + phys = <&usb2phy 0>; + phy-names = "usb"; status = "disabled"; }; @@ -690,6 +692,8 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; + phys = <&usb2phy 0>; + phy-names = "usb"; status = "disabled"; }; -- 2.17.5 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20210106150525.15403-2-andre.przywara%40arm.com.
