This may be beyond your scope, but do you konw if the 'tape deck' would
connect
to a standard floppy controller, if I were to pull it out of the external
case?
Is the EPAT protocol a function of the parallel interface module in the
T1000e
case, or the tape deck?
Thanks for any pointers on this question,
Perry
Jochen Hoenicke wrote:
> : Date: Mon, 25 Jan 1999 13:23:05 -0600
> : From: Perry Gilfillan <[EMAIL PROTECTED]>
> :
> : My goal is to get an HP T1000e to run under Linux.
>
> The T1000e isn't supported. It uses the EPAT protocol,
> which is totally different from the trakker and the BPCK protocols.
>
> Robert Blacquiere (guldan) is working on a driver, but I don't know if
> he gets forward with this (haven't heard anything for a couple of
> months now, I don't think that he has even started coding, yet). You
> may try the following email addresses, but I don't know if they are
> working:
>
> [EMAIL PROTECTED], [EMAIL PROTECTED]
>
> Lin Zhe Min <[EMAIL PROTECTED]> has also said, that he would work on
> such a driver.
>
> Good Luck
>
> Jochen
