Thanks!
Tonight I'll dismantle the 'e' box and rattle off a few numbers from the lables
on the tape deck and see if anyone recognizes them.
The next question is: Do tape drives use a straight through cable, as the
second floppy would? Or is there likely to be a special cable configuration?
Perry
Jochen Hoenicke wrote:
> : Date: Thu, 28 Jan 1999 11:06:39 -0600
> : From: Perry Gilfillan <[EMAIL PROTECTED]>
> :
> : This may be beyond your scope, but do you konw if the 'tape deck' would
> : connect
> : to a standard floppy controller, if I were to pull it out of the external
> : case?
>
> Not sure, but the chances are high.
>
> : Is the EPAT protocol a function of the parallel interface module in the
> : T1000e case, or the tape deck?
>
> It's probably only the protocol of the parallel interface.
>
> Jochen
