On Sun, 17 Jan 1999, Robert Napier wrote:
> I have a Ditto Max on lp0 under parport. Here's the specs:
> ftape version: ftape-4.x-1998_12_18 (which I've heard should work with
> Ditto Max. I couldn't get ftape-4.03-pre-2 to compile)
> kernel version: 2.2.0-pre7
> conf.modules excerpt:
> alias parport_lowlevel parport_pc
> options parport_pc io=0x378 irq=5
> alias char-major-27 zftape
> options ftape ft_fdc_driver=bpck-fdc,none,none,none
> (yes, I'm running lp0 on irq 5. There's a conflict on irq 7 that I
> haven't been able to track down yet. parport prints fine on lp0)
> /var/log/messages excerpt (with datetime removed for clarity):
[...]
> --- END ---
> Everything seems to work (if slowly), but all these errors seem very
> bad. When I tar to the tape, it works, but I get tons of:
[...]
I've the same problem and i'm interested on a solution too:
: ftape v4.03-pre-2 11/05/98
:
: (c) 1993-1996 Bas Laarhoven
: (c) 1995-1996 Kai Harrekilde-Petersen
: (c) 1996-1998 Claus-Justus Heine ([EMAIL PROTECTED])
:
: QIC-117 driver for QIC-40/80/3010/3020/Ditto 2GB/MAX floppy tape drives.
: Compiled for Linux version 2.2.1
: installing QIC-117 floppy tape hardware drive ...
: ftape_init @ 0xc5856208.
: zftape for ftape v4.03-pre-2 11/05/98
: (c) 1996, 1997 Claus-Justus Heine ([EMAIL PROTECTED])
: vfs interface for ftape floppy tape driver.
: Support for QIC-113 compatible volume table.
: Compiled for Linux version 2.2.1 with versioned symbols
: [000] zftape-init.c (zft_init) - zft_init @ 0xc58882e4.
: [001] zftape-init.c (zft_init) - installing zftape VFS interface for ftape driver
:....
: bpck-fdc.c: bpck_fdc_register @ 0xc5894db4
: [002] fdc-io.c (fdc_register_Rb14ebfe5) - Probing for bpck-fdc tape drive slot 0.
: [003] 0 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
:interface for ftape v4.0
: [004] bpck-fdc.c (bpck_fdc_switch_proto) - Need delay 1 for proto 0.
: [005] bpck-fdc.c (bpck_fdc_switch_proto) - Need delay 1 for proto 0.
: [006] bpck-fdc.c (bpck_fdc_log_adapter) - bpck floppy tape at 0x378, mode 0
:(4-bit), delay 1.
: [007] 0 bpck-fdc.c (bpck_fdc_probe) - Setting bpck irq to 7.
:
enable_irq() unbalanced from 00000007
Und Tsch�ss.
Stefan
### Kilroy was here ### 4:45pm up 26 days
