Hi!!!
I'm sorry I haven't replied sooner but I was busy the entire week (just
started school again and all). Anyway, here's the problem, everytime I
execute the command "ftmt -f /dev/qft0 status" I get a "Device not
configured" error. I'm using kernel 2.2.1 and the latest snapshot
ftape-4.x-1999_02_07.
(Kermel messages are included below)
I've executed 4 commands in all ie:
1. insmod ftape
2. insmod zftape
3. insmod bpck-fdc
4. ftmt -f /dev/qft0 status
Thanks (in advance)
ali
Below I've included messages reported by the kernel (as asked):
--------------------------after executing "insmod
ftape"----------------------
ftape v4.03-pre-2 11/05/98
(c) 1993-1996 Bas Laarhoven
(c) 1995-1996 Kai Harrekilde-Petersen
(c) 1996-1998 Claus-Justus Heine ([EMAIL PROTECTED])
QIC-117 driver for QIC-40/80/3010/3020/Ditto 2GB/MAX floppy tape drives.
Compiled for Linux version 2.2.1
installing QIC-117 floppy tape hardware drive ...
ftape_init @ 0xc2811208.
----------------------after executing "insmod
zftape"--------------------------
zftape for ftape v4.03-pre-2 11/05/98
(c) 1996, 1997 Claus-Justus Heine ([EMAIL PROTECTED])
vfs interface for ftape floppy tape driver.
Support for QIC-113 compatible volume table.
Compiled for Linux version 2.2.1
[000] zftape-init.c (zft_init) - zft_init @ 0xc28452e4.
[001] zftape-init.c (zft_init) - installing zftape VFS interface for
ftape driver ....
-----------------------after executing "insmod
bpck-fdc"-----------------------
>[003] 0 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[004] 0 fdc-parport.h (ft_parport_claim) - Unable to grab address
0x0378 for <NULL>.
[005] 0 bpck-fdc.c (bpck_fdc_grab) - ft_parport_claim(fdc,
&bpck->parinfo) failed: -16.
[006] 0 bpck-fdc.c (bpck_fdc_probe) - bpck_fdc_grab(fdc) failed: -16.
[007] 0 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[008] bpck-fdc.c (bpck_fdc_query_proto) - Got 0xf8, expected either
0xc0 or
0x40.
[009] 0 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[010] bpck-fdc.c (bpck_fdc_query_proto) - Got 0xf8, expected either
0xc0 or
0x40.
[011] 0 bpck-fdc.c (bpck_fdc_detect) - can't find bpck interface for
ftape id 0.[012] 0 bpck-fdc.c (bpck_fdc_detect) - ft_parport_probe(fdc,
&bpck->parinfo) failed: -6.
[013] fdc-io.c (fdc_register) - Probing for bpck-fdc tape drive slot
1.
[014] 1 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[015] 1 fdc-parport.h (ft_parport_claim) - Unable to grab address
0x0378 for <NULL>.
[016] 1 bpck-fdc.c (bpck_fdc_grab) - ft_parport_claim(fdc,
&bpck->parinfo) failed: -16.
[017] 1 bpck-fdc.c (bpck_fdc_probe) - bpck_fdc_grab(fdc) failed: -16.
[018] 1 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[019] bpck-fdc.c (bpck_fdc_query_proto) - Got 0xf8, expected either
0xc0 or
0x40.
[020] 1 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[021] bpck-fdc.c (bpck_fdc_query_proto) - Got 0xf8, expected either
0xc0 or
0x40.
[022] 1 bpck-fdc.c (bpck_fdc_detect) - can't find bpck interface for
ftape id 1.[023] 1 bpck-fdc.c (bpck_fdc_detect) - ft_parport_probe(fdc,
&bpck->parinfo) failed: -6.
[024] fdc-io.c (fdc_register) - Probing for bpck-fdc tape drive slot
2.
[025] 2 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[026] 2 fdc-parport.h (ft_parport_claim) - Unable to grab address
0x0378 for <NULL>.
[027] 2 bpck-fdc.c (bpck_fdc_grab) - ft_parport_claim(fdc,
&bpck->parinfo) failed: -16.
[028] 2 bpck-fdc.c (bpck_fdc_probe) - bpck_fdc_grab(fdc) failed: -16.
[029] 2 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[030] bpck-fdc.c (bpck_fdc_query_proto) - Got 0xf8, expected either
0xc0 or
0x40.
[031] 2 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[032] bpck-fdc.c (bpck_fdc_query_proto) - Got 0xf8, expected either
0xc0 or
0x40.
[033] 2 bpck-fdc.c (bpck_fdc_detect) - can't find bpck interface for
ftape id 2.[034] 2 bpck-fdc.c (bpck_fdc_detect) - ft_parport_probe(fdc,
&bpck->parinfo) failed: -6.
[035] fdc-io.c (fdc_register) - Probing for bpck-fdc tape drive slot
3.
[036] 3 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[037] 3 fdc-parport.h (ft_parport_claim) - Unable to grab address
0x0378 for <NULL>.
[038] 3 bpck-fdc.c (bpck_fdc_grab) - ft_parport_claim(fdc,
&bpck->parinfo) failed: -16.
[039] 3 bpck-fdc.c (bpck_fdc_probe) - bpck_fdc_grab(fdc) failed: -16.
[040] 3 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[041] bpck-fdc.c (bpck_fdc_query_proto) - Got 0xf8, expected either
0xc0 or
0x40.
[042] 3 bpck-fdc.c (bpck_fdc_probe) - Bpck parallel port tape drive
interface for ftape v4.03-pre-2 11/05/98.
[043] bpck-fdc.c (bpck_fdc_query_proto) - Got 0xf8, expected either
0xc0 or
0x40.
[044] 3 bpck-fdc.c (bpck_fdc_detect) - can't find bpck interface for
ftape id 3.[045] 3 bpck-fdc.c (bpck_fdc_detect) - ft_parport_probe(fdc,
&bpck->parinfo) failed: -6.
-----------------------------after executing "ftmt -f /dev/qft0
status"--------
[056] 0 fdc-io.c (fdc_search_driver) - No tape drive found for
"bpck-fdc" driver.
[057] 0 fdc-io.c (fdc_init) - fdc_search_driver(ftape->drive_sel)
failed: -6.[058] 0 ftape-ctl.c (ftape_enable) - fdc_init(ftape)
failed: -6.
[059] 0 zftape-ctl.c (_zft_open) - ftape_enable(sel) failed: -6.
[060] 0 zftape-init.c (zft_open) - _zft_open failed.
