Hi Chuck.
I've got the same problem, but after I kill my lpd no problemo, you can
try this.
-
Med venlig hilsen
Jesper Langkj�r
---------------------------------------------------------------
Minisoft A/S, �rstedsvej 13, 8600 Silkeborg
Tef. (+45) 86 81 34 88 Fax (+45) 86 80 13 97
E-mail mailto:[EMAIL PROTECTED]
Internet adresse: HTTP:\\www.minisoft.dk
-----Oprindelig meddelelse-----
Fra: Chuck Lidderdale [SMTP:[EMAIL PROTECTED]]
Sendt: 12. marts 1999 19:50
Til: 'linux-tape'
Emne: Iomegs 2GB help
I downloaded the latest ftape, compiled & installed.
No luck yet - best I get is "Device or resource busy"
and I'm not sure its even talking to the tape -
=================
HW = P120, floppy connector on MB, as follows: conn - ribbon -
tape
-[some lines twisted] - floppy. [ hope that last part makes
sense ]
??? should the floppy be first then the tape ??? or does it care
??
I have a colorado FC-10 someplace in a parts box - should I dig
it out and install it - [ w95/iomega sw ??? something didn't
like
it/wouldn't work with it back when so I took it out ]
=========================
here are the only 2 lines in mod/ins
insmod ./ftape.o
ft_fdc_driver=ftape-internal,bpck-fdc:trakker,none,none
ft_tracings=3,3,3,3,3
nsmod ./zftape.o ft_major_device_number=27 # ${27-FT_MAJOR}
=========================
/var/log/messages
ftape v4.03-pre-2 11/05/98
(c) 1993-1996 Bas Laarhoven
(c) 1995-1996 Kai Harrekilde-Petersen
(c) 1996-1998 Claus-Justus Heine
([EMAIL PROTECTED])
QIC-117 driver for QIC-40/80/3010/3020/Ditto 2GB/MAX floppy
tape
drives.
Compiled for Linux version 2.0.36
installing QIC-117 floppy tape hardware drive ...
ftape_init @ 0x048181b0.
zftape for ftape v4.03-pre-2 11/05/98
(c) 1996, 1997 Claus-Justus Heine
([EMAIL PROTECTED])
vfs interface for ftape floppy tape driver.
Support for QIC-113 compatible volume table.
Compiled for Linux version 2.0.36 with versioned symbols
[000] zftape-init.c (zft_init) - zft_init @ 0x0484cfc8.
[001] zftape-init.c (zft_init) - installing zftape VFS
interface for ftape driver ....
fdc-internal.c: fdc_internal_register @ 0x04854900.
[002] fdc-io.c (fdc_register_R3448e164) - Probing for
ftape-internal tape drive slot 0.
[003] 0 fdc-internal.c (_fdc_int_detect) - called with
count 0.
[004] 0 fdc-internal.c (fdc_int_grab) - Unable to grab
IRQ9 for ftape driver.
[005] 0 fdc-internal.c (_fdc_int_detect) -
fdc_int_grab(fdc) failed: -16.
[006] 0 fdc-io.c (fdc_init) -
fdc_search_driver(ftape->drive_sel) failed: -6.
[007] 0 ftape-ctl.c (ftape_enable_Rc3315ad0) -
fdc_init(ftape) failed: -6.
[008] 0 zftape-ctl.c (_zft_open) - ftape_enable_Rc3315ad0(sel)
failed: -6.
[009] 0 zftape-init.c (zft_open) - _zft_open failed.
fdc_internal successfully unloaded.
[010] zftape-init.c (cleanup_module) - successful.
zftape successfully unloaded.
ftape: unloaded.
=========================
Thanks again
Chuck
Chuck Lidderdale
[EMAIL PROTECTED]
http://shell.rmi.net/~liderbug/hydro
