Francesco Zuliani wrote:
> Hi everybody,
>
> I've a Iomega DittoMax connected to a ISA-card that
> pnpdump claims to be:
> # Card 1: (serial identifier 0f ff ff ff ff 40 00 ed 25)
> # Vendor Id IOM0040, No Serial Number (-1), checksum 0x0F.
> # Version 1.0, Vendor version 0.1
> # ANSI string -->iomega 4Mb/S PNP tape controller<--
>
> I'm trying to compile the ftape 4.02 package under RedHat 6.0
> (meaning Linux Kernel 2.2.5)
> but I get the error listed below.
Have you read the HOWTO for the ftape package. It is for tapes that are
connected to a floppy-disk controller, not to an ISA or SCSI controller.
> Any help would be appreciated.
>
> Thanks in advance.
> Francesco
>
> make[2]: Entering directory `/home/zuliani/ftape-4.02/ftape/lowlevel'
> gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
> -fno-strength-reduce -DTHE_FTAPE_MAINTAINER=\"[EMAIL PROTECTED]\"
> -DBROKEN_FLOPPY_DRIVER -DCONFIG_FT_PROC_FS -DCONFIG_FT_STD_FDC_0
> -DCONFIG_FT_AUTO_0=1 -DCONFIG_FTAPE_MODULE -DCONFIG_FT_INTERNAL_MODULE
> -DCONFIG_FT_TRAKKER_MODULE -DCONFIG_FT_BPCK_MODULE -DCONFIG_ZFTAPE_MODULE
> -DCONFIG_ZFT_COMPRESSOR_MODULE -DMODULE -DMODVERSIONS -include
> /usr/src/linux/include/linux/modversions.h -include
> ../../include/linux/modversions.h -D__KERNEL__ -I. -I../../include
> -I/usr/src/linux/include -m486 -malign-loops=2 -malign-jumps=2
> -malign-functions=2 -DCPU=686 -c fdc-io.c
> fdc-io.c: In function `fdc_interrupt_wait':
> fdc-io.c:433: structure has no member named `timeout'
> fdc-io.c:454: structure has no member named `timeout'
> make[2]: *** [fdc-io.o] Error 1
You will get this if you try to compile 4.02 with the 2.2.* kernels. You
would need (if you needed ftape at all) to use the "unstable" kernels.
--
Jean-David Beyer
Shrewsbury, New Jersey
Registered Linux User 85642.
S/MIME Cryptographic Signature
