On Wed, Jun 09, 1999 at 09:03:40PM +0000, Jean-David Beyer wrote:
> Francesco Zuliani wrote:
>
> > Hi everybody,
> >
> > I've a Iomega DittoMax connected to a ISA-card that
> > pnpdump claims to be:
> > # Card 1: (serial identifier 0f ff ff ff ff 40 00 ed 25)
> > # Vendor Id IOM0040, No Serial Number (-1), checksum 0x0F.
> > # Version 1.0, Vendor version 0.1
> > # ANSI string -->iomega 4Mb/S PNP tape controller<--
> >
> > I'm trying to compile the ftape 4.02 package under RedHat 6.0
> > (meaning Linux Kernel 2.2.5)
> > but I get the error listed below.
>
> Have you read the HOWTO for the ftape package. It is for tapes that are
> connected to a floppy-disk controller, not to an ISA or SCSI controller.
That controller is an accelerator card and IS supported by ftape.
However ftape 4.02 will not work with a 2.2.x kernel. Get the 4.0x..
version in the unstable area of the ftape site.
Bob
--
Bob Nielsen Internet: [EMAIL PROTECTED]
Tucson, AZ AMPRnet: [EMAIL PROTECTED]
DM42nh http://www.primenet.com/~nielsen
