I finally decided to upgrade from ftape 3.04d in kernel 2.2.14 to the
latest ftape-4.x-1999_09_11. It compiled successfully and the modules
get loaded, but when I try to issue any tape commands, I get errors
like
ftmt: /dev/qft0: Device not configured
The drive is an Iomega ditto easy 3200 (internal). I am loading the
modules with:
/sbin/modprobe ftape ft_fdc_driver=ftape-internal,none,none,none
/sbin/modprobe zftape ft_major_device_number=27
/sbin/modprobe ftape-internal ft_fdc_base=0x370 ft_fdc_irq=6 ft_fdc_dma=2
/sbin/modprobe zft-compressor
The memory, irq and dma parameters reflect the jumper settings on my
Ditto Dash controller card.
Is there something I am missing? I never had this type of error with
2.x or 3.04d.
Bob
--
Bob Nielsen, N7XY (RN2) [EMAIL PROTECTED]
Tucson, AZ DM42nh QRP-L #1985 SOC #77 http://www.primenet.com/~nielsen
