Nostradamus foresaw that on Jul 22, Claus-Justus Heine would write:
->Mike Hardy <[EMAIL PROTECTED]> writes:
->
->> ftape: 4.03
->> ftape-tools: 1.08
->> kernel: 2.2.5
->> Pent 200, 80M RAM, Colorado Jumbo 250, FC-20 controller
->>
->> /etc/conf.modules entries:
->>
->> alias char-major-27 zftape
->> options ftape ft_probe_fc10=1
->> options ftape ft_fdc_driver=ftape-internal,none,none,none
->> options ftape-internal ft_fdc_base=0x180 ft_fdc_irq=9 ft_fdc_dma=2
->>
->> Description:
->>
->> Using the newest ftape and ftape-tools (although I've had this error
->> before this newest rev), any time I try to format a 307' QIC-80 tape in
->> a Colorado Jumbo 250 I get right to the very end of formatting (when
->> it's verifying) and it craps out with:
->>
->> ftape-io.c (ftape_seek_head_to_track) - track out of bounds.
->
->Ups. Can you please load the driver with the following option:
->
->options ftape ft_fdc_driver=ftape-internal,none,none,none ft_tracings=4,4,4,4,4
I added the above to /etc/conf* but do not get any additional log output
- am I supposed to include something in /etc/syslog.conf as well? I
still get all the other ftape output to /var/log/messages so I expected
the new stuff to show up there as well. It didn't. When I last
compiled ftape I did set in MCONFIG:
TRACE_FLAGS = -DCONFIG_FT_NO_TRACE
so maybe that's why no addt'l output. Anyway if you don't reply to this
I'm going to move on to the next msg you sent where you say to
recompile. etc. I'll reset TRACE_FLAGS when I do and when I finish
what's in your last message I'll mail with results of instructions in
both of your messages...
Mike
---------------------
Mike Hardy
[EMAIL PROTECTED]
Aunty Em: Hate you, hate Kansas, took the dog - Dorothy
