On Tue, 23 Sep 2025, Shuai Xue wrote: > > > 在 2025/9/22 21:10, Ilpo Järvinen 写道: > > On Sat, 20 Sep 2025, Shuai Xue wrote: > > > > > Hotplug events are critical indicators for analyzing hardware health, > > > and surprise link downs can significantly impact system performance and > > > reliability. > > > > > > Define a new TRACING_SYSTEM named "pci", add a generic RAS tracepoint > > > for hotplug event to help health checks. Add enum pci_hotplug_event in > > > include/uapi/linux/pci.h so applications like rasdaemon can register > > > tracepoint event handlers for it. > > > > > > The following output is generated when a device is hotplugged: > > > > > > $ echo 1 > /sys/kernel/debug/tracing/events/pci/pci_hp_event/enable > > > $ cat /sys/kernel/debug/tracing/trace_pipe > > > irq/51-pciehp-88 [001] ..... 1311.177459: pci_hp_event: > > > 0000:00:02.0 slot:10, event:CARD_PRESENT > > > > > > irq/51-pciehp-88 [001] ..... 1311.177566: pci_hp_event: > > > 0000:00:02.0 slot:10, event:LINK_UP > > > > > > Suggested-by: Lukas Wunner <[email protected]> > > > Suggested-by: Steven Rostedt <[email protected]> > > > Signed-off-by: Shuai Xue <[email protected]> > > > Reviewed-by: Lukas Wunner <[email protected]> > > > Reviewed-by: Jonathan Cameron <[email protected]> > > > --- > > > drivers/pci/Makefile | 2 + > > > drivers/pci/hotplug/Makefile | 3 +- > > > drivers/pci/hotplug/pciehp_ctrl.c | 31 ++++++++++++--- > > > drivers/pci/trace.c | 11 ++++++ > > > include/trace/events/pci.h | 63 +++++++++++++++++++++++++++++++ > > > include/uapi/linux/pci.h | 7 ++++ > > > 6 files changed, 110 insertions(+), 7 deletions(-) > > > create mode 100644 drivers/pci/trace.c > > > create mode 100644 include/trace/events/pci.h > > > > > > diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile > > > index 67647f1880fb..bf389bc4dd3c 100644 > > > --- a/drivers/pci/Makefile > > > +++ b/drivers/pci/Makefile > > > @@ -45,3 +45,5 @@ obj-y += controller/ > > > obj-y += switch/ > > > subdir-ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG > > > + > > > +CFLAGS_trace.o := -I$(src) > > > diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile > > > index 40aaf31fe338..d41f7050b072 100644 > > > --- a/drivers/pci/hotplug/Makefile > > > +++ b/drivers/pci/hotplug/Makefile > > > @@ -65,7 +65,8 @@ rpadlpar_io-objs := rpadlpar_core.o \ > > > pciehp-objs := pciehp_core.o \ > > > pciehp_ctrl.o \ > > > pciehp_pci.o \ > > > - pciehp_hpc.o > > > + pciehp_hpc.o \ > > > + ../trace.o > > > > To make it useful for any PCI tracing, not juse hotplug, this object file > > should be added in drivers/pci/Makefile, not here. > > Make sence. How about adding to the main CONFIG_PCI object: > > diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile > index bf389bc4dd3c..d7f83d06351d 100644 > --- a/drivers/pci/Makefile > +++ b/drivers/pci/Makefile > @@ -5,7 +5,7 @@ > obj-$(CONFIG_PCI) += access.o bus.o probe.o host-bridge.o \ > remove.o pci.o pci-driver.o search.o \ > rom.o setup-res.o irq.o vpd.o \ > - setup-bus.o vc.o mmap.o devres.o > + setup-bus.o vc.o mmap.o devres.o trace.o > > obj-$(CONFIG_PCI) += msi/ > obj-$(CONFIG_PCI) += pcie/
Yes, that's the right place to add it. -- i.
