Hi William,
If you want to use SmartMedia cards which are 32MB or larger, you
probably want to use this latest driver!
--Rob
/* Driver for SanDisk SDDR-09 SmartMedia reader
*
* $Id: sddr09.c,v 1.16 2001/03/27 22:37:55 groovyjava Exp $
*
* SDDR09 driver v0.1:
*
* First release
*
* Current development and maintenance by:
* (c) 2000, 2001 Robert Baruch ([EMAIL PROTECTED])
*
* The SanDisk SDDR-09 SmartMedia reader uses the Shuttle EUSB-01 chip.
* This chip is a programmable USB controller. In the SDDR-09, it has
* been programmed to obey a certain limited set of SCSI commands. This
* driver translates the "real" SCSI commands to the SDDR-09 SCSI
* commands.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "transport.h"
#include "protocol.h"
#include "usb.h"
#include "debug.h"
#include "sddr09.h"
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/slab.h>
#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
#define LSB_of(s) ((s)&0xFF)
#define MSB_of(s) ((s)>>8)
/*
* Send a control message and wait for the response.
*
* us - the pointer to the us_data structure for the device to use
*
* request - the URB Setup Packet's first 6 bytes. The first byte always
* corresponds to the request type, and the second byte always corresponds
* to the request. The other 4 bytes do not correspond to value and index,
* since they are used in a custom way by the SCM protocol.
*
* xfer_data - a buffer from which to get, or to which to store, any data
* that gets send or received, respectively, with the URB. Even though
* it looks like we allocate a buffer in this code for the data, xfer_data
* must contain enough allocated space.
*
* xfer_len - the number of bytes to send or receive with the URB.
*
*/
static int sddr09_send_control(struct us_data *us,
int pipe,
unsigned char request,
unsigned char requesttype,
unsigned short value,
unsigned short index,
unsigned char *xfer_data,
unsigned int xfer_len) {
int result;
// If data is going to be sent or received with the URB,
// then allocate a buffer for it. If data is to be sent,
// copy the data into the buffer.
/*
if (xfer_len > 0) {
buffer = kmalloc(xfer_len, GFP_KERNEL);
if (!(command[0] & USB_DIR_IN))
memcpy(buffer, xfer_data, xfer_len);
}
*/
// Send the URB to the device and wait for a response.
/* Why are request and request type reversed in this call? */
result = usb_stor_control_msg(us, pipe,
request, requesttype, value, index,
xfer_data, xfer_len);
// If data was sent or received with the URB, free the buffer we
// allocated earlier, but not before reading the data out of the
// buffer if we wanted to receive data.
/*
if (xfer_len > 0) {
if (command[0] & USB_DIR_IN)
memcpy(xfer_data, buffer, xfer_len);
kfree(buffer);
}
*/
// Check the return code for the command.
if (result < 0) {
/* if the command was aborted, indicate that */
if (result == -ENOENT)
return USB_STOR_TRANSPORT_ABORTED;
/* a stall is a fatal condition from the device */
if (result == -EPIPE) {
US_DEBUGP("-- Stall on control pipe. Clearing\n");
result = usb_clear_halt(us->pusb_dev, pipe);
US_DEBUGP("-- usb_clear_halt() returns %d\n", result);
return USB_STOR_TRANSPORT_FAILED;
}
/* Uh oh... serious problem here */
return USB_STOR_TRANSPORT_ERROR;
}
return USB_STOR_TRANSPORT_GOOD;
}
static int sddr09_raw_bulk(struct us_data *us,
int direction,
unsigned char *data,
unsigned int len) {
int result;
int act_len;
int pipe;
if (direction == SCSI_DATA_READ)
pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
else
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
result = usb_stor_bulk_msg(us, data, pipe, len, &act_len);
/* if we stall, we need to clear it before we go on */
if (result == -EPIPE) {
US_DEBUGP("EPIPE: clearing endpoint halt for"
" pipe 0x%x, stalled at %d bytes\n",
pipe, act_len);
usb_clear_halt(us->pusb_dev, pipe);
}
if (result) {
/* NAK - that means we've retried a few times already */
if (result == -ETIMEDOUT) {
US_DEBUGP("usbat_raw_bulk():"
" device NAKed\n");
return US_BULK_TRANSFER_FAILED;
}
/* -ENOENT -- we canceled this transfer */
if (result == -ENOENT) {
US_DEBUGP("usbat_raw_bulk():"
" transfer aborted\n");
return US_BULK_TRANSFER_ABORTED;
}
if (result == -EPIPE) {
US_DEBUGP("usbat_raw_bulk():"
" output pipe stalled\n");
return USB_STOR_TRANSPORT_FAILED;
}
/* the catch-all case */
US_DEBUGP("us_transfer_partial(): unknown error\n");
return US_BULK_TRANSFER_FAILED;
}
if (act_len != len) {
US_DEBUGP("Warning: Transferred only %d bytes\n",
act_len);
return US_BULK_TRANSFER_SHORT;
}
US_DEBUGP("Transfered %d of %d bytes\n", act_len, len);
return US_BULK_TRANSFER_GOOD;
}
/*
* Note: direction must be set if command_len == 0.
*/
static int sddr09_bulk_transport(struct us_data *us,
int direction,
unsigned char *data,
unsigned int len,
int use_sg) {
int result = USB_STOR_TRANSPORT_GOOD;
int transferred = 0;
int i;
struct scatterlist *sg;
char string[64];
if (len==0)
return USB_STOR_TRANSPORT_GOOD;
/* transfer the data */
if (direction == SCSI_DATA_WRITE) {
/* Debug-print the first 48 bytes of the write transfer */
if (!use_sg) {
strcpy(string, "wr: ");
for (i=0; i<len && i<48; i++) {
sprintf(string+strlen(string), "%02X ",
data[i]);
if ((i%16)==15) {
US_DEBUGP("%s\n", string);
strcpy(string, "wr: ");
}
}
if ((i%16)!=0)
US_DEBUGP("%s\n", string);
}
}
US_DEBUGP("SCM data %s transfer %d sg buffers %d\n",
( direction==SCSI_DATA_READ ? "in" : "out"),
len, use_sg);
if (!use_sg)
result = sddr09_raw_bulk(us, direction, data, len);
else {
sg = (struct scatterlist *)data;
for (i=0; i<use_sg && transferred<len; i++) {
result = sddr09_raw_bulk(us, direction,
sg[i].address,
len-transferred > sg[i].length ?
sg[i].length : len-transferred);
if (result!=US_BULK_TRANSFER_GOOD)
break;
transferred += sg[i].length;
}
}
if (direction == SCSI_DATA_READ) {
/* Debug-print the first 48 bytes of the read transfer */
if (!use_sg) {
strcpy(string, "rd: ");
for (i=0; i<len && i<48; i++) {
sprintf(string+strlen(string), "%02X ",
data[i]);
if ((i%16)==15) {
US_DEBUGP("%s\n", string);
strcpy(string, "rd: ");
}
}
if ((i%16)!=0)
US_DEBUGP("%s\n", string);
}
}
return result;
}
int sddr09_read_data(struct us_data *us,
unsigned long address,
unsigned short sectors,
unsigned char *content,
int use_sg) {
int result;
unsigned char command[12] = {
0xe8, 0x20, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
struct sddr09_card_info *info = (struct sddr09_card_info *)us->extra;
unsigned int lba;
unsigned int pba;
unsigned short page;
unsigned short pages;
unsigned char *buffer = NULL;
unsigned char *ptr;
struct scatterlist *sg = NULL;
int i;
int len;
int transferred;
// If we're using scatter-gather, we have to create a new
// buffer to read all of the data in first, since a
// scatter-gather buffer could in theory start in the middle
// of a page, which would be bad. A developer who wants a
// challenge might want to write a limited-buffer
// version of this code.
len = sectors*info->pagesize;
if (use_sg) {
sg = (struct scatterlist *)content;
buffer = kmalloc(len, GFP_KERNEL);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
ptr = buffer;
} else
ptr = content;
// Figure out the initial LBA and page
pba = address >> (info->pageshift + info->blockshift);
lba = info->pba_to_lba[pba];
page = (address >> info->pageshift) & info->blockmask;
// This could be made much more efficient by checking for
// contiguous LBA's. Another exercise left to the student.
while (sectors>0) {
pba = info->lba_to_pba[lba];
// Read as many sectors as possible in this block
pages = info->blocksize - page;
if (pages > sectors)
pages = sectors;
US_DEBUGP("Read %02X pages, from PBA %04X"
" (LBA %04X) page %02X\n",
pages, pba, lba, page);
address = ( (pba << info->blockshift) + page ) <<
info->pageshift;
// Unlike in the documentation, the address is in
// words of 2 bytes.
command[2] = MSB_of(address>>17);
command[3] = LSB_of(address>>17);
command[4] = MSB_of((address>>1)&0xFFFF);
command[5] = LSB_of((address>>1)&0xFFFF);
command[10] = MSB_of(pages);
command[11] = LSB_of(pages);
result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
command,
12);
US_DEBUGP("Result for send_control in read_data %d\n",
result);
if (result != USB_STOR_TRANSPORT_GOOD) {
if (use_sg)
kfree(buffer);
return result;
}
result = sddr09_bulk_transport(us,
SCSI_DATA_READ, ptr,
pages<<info->pageshift, 0);
if (result != USB_STOR_TRANSPORT_GOOD) {
if (use_sg)
kfree(buffer);
return result;
}
page = 0;
lba++;
sectors -= pages;
ptr += (pages << info->pageshift);
}
if (use_sg) {
transferred = 0;
for (i=0; i<use_sg && transferred<len; i++) {
memcpy(sg[i].address, buffer+transferred,
len-transferred > sg[i].length ?
sg[i].length : len-transferred);
transferred += sg[i].length;
}
kfree(buffer);
}
return USB_STOR_TRANSPORT_GOOD;
}
int sddr09_read_control(struct us_data *us,
unsigned long address,
unsigned short blocks,
unsigned char *content,
int use_sg) {
// Unlike in the documentation, the last two bytes are the
// number of blocks, not sectors.
int result;
unsigned char command[12] = {
0xe8, 0x21, MSB_of(address>>16),
LSB_of(address>>16), MSB_of(address&0xFFFF),
LSB_of(address&0xFFFF), 0, 0, 0, 0,
MSB_of(blocks), LSB_of(blocks)
};
US_DEBUGP("Read control address %08lX blocks %04X\n",
address, blocks);
result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
command,
12);
US_DEBUGP("Result for send_control in read_control %d\n",
result);
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
result = sddr09_bulk_transport(us,
SCSI_DATA_READ, content,
blocks<<6, use_sg); // 0x40 bytes per block
US_DEBUGP("Result for bulk read in read_control %d\n",
result);
return result;
}
int sddr09_read_deviceID(struct us_data *us,
unsigned char *manufacturerID,
unsigned char *deviceID) {
int result;
unsigned char command[12] = {
0xed, 0x20, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
unsigned char content[64];
result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
command,
12);
US_DEBUGP("Result of send_control for device ID is %d\n",
result);
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
result = sddr09_bulk_transport(us,
SCSI_DATA_READ, content,
64, 0);
*manufacturerID = content[0];
*deviceID = content[1];
return result;
}
int sddr09_read_status(struct us_data *us,
unsigned char *status) {
int result;
unsigned char command[12] = {
0xec, 0x20, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
command,
12);
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
result = sddr09_bulk_transport(us,
SCSI_DATA_READ, status,
1, 0);
return result;
}
int sddr09_reset(struct us_data *us) {
int result;
unsigned char command[12] = {
0xeb, 0x20, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
command,
12);
return result;
}
unsigned long sddr09_get_capacity(struct us_data *us,
unsigned int *pagesize, unsigned int *blocksize) {
unsigned char manufacturerID;
unsigned char deviceID;
int result;
US_DEBUGP("Reading capacity...\n");
result = sddr09_read_deviceID(us,
&manufacturerID,
&deviceID);
US_DEBUGP("Result of read_deviceID is %d\n",
result);
if (result != USB_STOR_TRANSPORT_GOOD)
return 0;
US_DEBUGP("Device ID = %02X\n", deviceID);
US_DEBUGP("Manuf ID = %02X\n", manufacturerID);
*pagesize = 512;
*blocksize = 16;
switch (deviceID) {
case 0x6e: // 1MB
case 0xe8:
case 0xec:
*pagesize = 256;
return 0x00100000;
case 0xea: // 2MB
case 0x5d: // 5d is a ROM card with pagesize 512.
case 0x64:
if (deviceID!=0x5D)
*pagesize = 256;
return 0x00200000;
case 0xe3: // 4MB
case 0xe5:
case 0x6b:
case 0xd5:
return 0x00400000;
case 0xe6: // 8MB
case 0xd6:
return 0x00800000;
case 0x73: // 16MB
*blocksize = 32;
return 0x01000000;
case 0x75: // 32MB
*blocksize = 32;
return 0x02000000;
case 0x76: // 64MB
*blocksize = 32;
return 0x04000000;
case 0x79: // 128MB
*blocksize = 32;
return 0x08000000;
default: // unknown
return 0;
}
}
int sddr09_read_map(struct us_data *us) {
struct scatterlist *sg;
struct sddr09_card_info *info = (struct sddr09_card_info *)(us->extra);
int numblocks;
int i;
unsigned char *ptr;
unsigned short lba;
unsigned char parity;
unsigned char fast_parity[16] = {
0, 1, 1, 0, 1, 0, 0, 1,
1, 0, 0, 1, 0, 1, 1, 0
};
int result;
int alloc_len;
int alloc_blocks;
if (!info->capacity)
return -1;
// read 64 (1<<6) bytes for every block
// ( 1 << ( blockshift + pageshift ) bytes)
// of capacity:
// (1<<6)*capacity/(1<<(b+p)) =
// ((1<<6)*capacity)>>(b+p) =
// capacity>>(b+p-6)
alloc_len = info->capacity >>
(info->blockshift + info->pageshift - 6);
// Allocate a number of scatterlist structures according to
// the number of 128k blocks in the alloc_len. Adding 128k-1
// and then dividing by 128k gives the correct number of blocks.
// 128k = 1<<17
alloc_blocks = (alloc_len + (1<<17) - 1) >> 17;
sg = kmalloc(alloc_blocks*sizeof(struct scatterlist),
GFP_KERNEL);
if (sg == NULL)
return 0;
for (i=0; i<alloc_blocks; i++) {
if (i<alloc_blocks-1) {
sg[i].address = kmalloc( (1<<17), GFP_KERNEL );
sg[i].length = (1<<17);
} else {
sg[i].address = kmalloc(alloc_len, GFP_KERNEL);
sg[i].length = alloc_len;
}
alloc_len -= sg[i].length;
}
for (i=0; i<alloc_blocks; i++)
if (sg[i].address == NULL) {
for (i=0; i<alloc_blocks; i++)
if (sg[i].address != NULL)
kfree(sg[i].address);
kfree(sg);
return 0;
}
numblocks = info->capacity >> (info->blockshift + info->pageshift);
if ( (result = sddr09_read_control(us, 0, numblocks,
(unsigned char *)sg, alloc_blocks)) !=
USB_STOR_TRANSPORT_GOOD) {
for (i=0; i<alloc_blocks; i++)
kfree(sg[i].address);
kfree(sg);
return -1;
}
if (info->lba_to_pba)
kfree(info->lba_to_pba);
if (info->pba_to_lba)
kfree(info->pba_to_lba);
info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_KERNEL);
info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_KERNEL);
if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
if (info->lba_to_pba != NULL)
kfree(info->lba_to_pba);
if (info->pba_to_lba != NULL)
kfree(info->pba_to_lba);
info->lba_to_pba = NULL;
info->pba_to_lba = NULL;
for (i=0; i<alloc_blocks; i++)
kfree(sg[i].address);
kfree(sg);
return 0;
}
memset(info->lba_to_pba, 0, numblocks*sizeof(int));
memset(info->pba_to_lba, 0, numblocks*sizeof(int));
// Each block is 64 bytes of control data, so block i is located in
// scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11)
for (i=0; i<numblocks; i++) {
ptr = sg[i>>11].address+(i<<6);
if (ptr[0]!=0xFF || ptr[1]!=0xFF || ptr[2]!=0xFF ||
ptr[3]!=0xFF || ptr[4]!=0xFF || ptr[5]!=0xFF) {
US_DEBUGP("PBA %04X has no logical mapping: reserved area = "
"%02X%02X%02X%02X data status %02X block status %02X\n",
i, ptr[0], ptr[1], ptr[2], ptr[3], ptr[4], ptr[5]);
continue;
}
if ((ptr[6]>>4)!=0x01) {
US_DEBUGP("PBA %04X has invalid address field
%02X%02X/%02X%02X\n",
i, ptr[6], ptr[7], ptr[11], ptr[12]);
continue;
}
/* ensure even parity */
lba = short_pack(ptr[7], ptr[6]);
parity = 1; // the parity of 0x1000
parity ^= fast_parity[lba & 0x000F];
parity ^= fast_parity[(lba>>4) & 0x000F];
parity ^= fast_parity[(lba>>8) & 0x000F];
if (parity) { /* bad parity bit */
US_DEBUGP("Bad parity in LBA for block %04X\n", i);
continue;
}
lba = (lba&0x07FF)>>1;
/* Every 1024 physical blocks ("zone"), the LBA numbers
* go back to zero, but are within a higher
* block of LBA's. Also, there is a maximum of
* 1000 LBA's per zone. In other words, in PBA
* 1024-2047 you will find LBA 0-999 which are
* really LBA 1000-1999. Yes, this wastes 24
* physical blocks per zone. Go figure.
*/
lba += 1000*(i/0x400);
if (lba>=numblocks) {
US_DEBUGP("Bad LBA %04X for block %04X\n", lba, i);
continue;
}
if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF))
US_DEBUGP("LBA %04X <-> PBA %04X\n", lba, i);
info->pba_to_lba[i] = lba;
info->lba_to_pba[lba] = i;
}
for (i=0; i<alloc_blocks; i++)
kfree(sg[i].address);
kfree(sg);
return 0;
}
/*
static int init_sddr09(struct us_data *us) {
int result;
unsigned char data[14];
unsigned char command[8] = {
0xc1, 0x01, 0, 0, 0, 0, 0, 0
};
unsigned char command2[8] = {
0x41, 0, 0, 0, 0, 0, 0, 0
};
unsigned char tur[12] = {
0x03, 0x20, 0, 0, 0x0e, 0, 0, 0, 0, 0, 0, 0
};
// What the hey is all this for? Doesn't seem to
// affect the device, so we won't do device inits.
if ( (result = sddr09_send_control(us, command, data, 2)) !=
USB_STOR_TRANSPORT_GOOD)
return result;
US_DEBUGP("SDDR09: %02X %02X\n", data[0], data[1]);
command[1] = 0x08;
if ( (result = sddr09_send_control(us, command, data, 2)) !=
USB_STOR_TRANSPORT_GOOD)
return result;
US_DEBUGP("SDDR09: %02X %02X\n", data[0], data[1]);
if ( (result = sddr09_send_control(us, command2, tur, 12)) !=
USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("SDDR09: request sense failed\n");
return result;
}
if ( (result = sddr09_raw_bulk(
us, SCSI_DATA_READ, data, 14)) !=
USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("SDDR09: request sense bulk in failed\n");
return result;
}
US_DEBUGP("SDDR09: request sense worked\n");
return result;
}
*/
void sddr09_card_info_destructor(void *extra) {
struct sddr09_card_info *info = (struct sddr09_card_info *)extra;
if (!extra)
return;
if (info->lba_to_pba)
kfree(info->lba_to_pba);
if (info->pba_to_lba)
kfree(info->pba_to_lba);
}
/*
* Transport for the Sandisk SDDR-09
*/
int sddr09_transport(Scsi_Cmnd *srb, struct us_data *us)
{
int result;
int i;
char string[64];
unsigned char inquiry_response[36] = {
0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00
};
unsigned char mode_page_01[16] = { // write-protected for now
0x03, 0x00, 0x80, 0x00,
0x01, 0x0A,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
unsigned char *ptr;
unsigned long capacity;
unsigned int lba;
unsigned int pba;
unsigned int page;
unsigned short pages;
struct sddr09_card_info *info = (struct sddr09_card_info *)(us->extra);
if (!us->extra) {
us->extra = kmalloc(
sizeof(struct sddr09_card_info), GFP_KERNEL);
if (!us->extra)
return USB_STOR_TRANSPORT_ERROR;
memset(us->extra, 0, sizeof(struct sddr09_card_info));
us->extra_destructor = sddr09_card_info_destructor;
}
ptr = (unsigned char *)srb->request_buffer;
/* Dummy up a response for INQUIRY since SDDR09 doesn't
respond to INQUIRY commands */
if (srb->cmnd[0] == INQUIRY) {
memset(inquiry_response+8, 0, 28);
fill_inquiry_response(us, inquiry_response, 36);
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == READ_CAPACITY) {
capacity = sddr09_get_capacity(us, &info->pagesize,
&info->blocksize);
if (!capacity)
return USB_STOR_TRANSPORT_FAILED;
info->capacity = capacity;
for (info->pageshift=1;
(info->pagesize>>info->pageshift);
info->pageshift++);
info->pageshift--;
for (info->blockshift=1;
(info->blocksize>>info->blockshift);
info->blockshift++);
info->blockshift--;
info->blockmask = (1<<info->blockshift)-1;
// Last page in the card
capacity /= info->pagesize;
capacity--;
ptr[0] = MSB_of(capacity>>16);
ptr[1] = LSB_of(capacity>>16);
ptr[2] = MSB_of(capacity&0xFFFF);
ptr[3] = LSB_of(capacity&0xFFFF);
// The page size
ptr[4] = MSB_of(info->pagesize>>16);
ptr[5] = LSB_of(info->pagesize>>16);
ptr[6] = MSB_of(info->pagesize&0xFFFF);
ptr[7] = LSB_of(info->pagesize&0xFFFF);
sddr09_read_map(us);
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == MODE_SENSE) {
// Read-write error recovery page: there needs to
// be a check for write-protect here
if ( (srb->cmnd[2] & 0x3F) == 0x01 ) {
US_DEBUGP(
"SDDR09: Dummy up request for mode page 1\n");
if (ptr==NULL ||
srb->request_bufflen<sizeof(mode_page_01))
return USB_STOR_TRANSPORT_ERROR;
memcpy(ptr, mode_page_01, sizeof(mode_page_01));
return USB_STOR_TRANSPORT_GOOD;
} else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) {
US_DEBUGP(
"SDDR09: Dummy up request for all mode pages\n");
if (ptr==NULL ||
srb->request_bufflen<sizeof(mode_page_01))
return USB_STOR_TRANSPORT_ERROR;
memcpy(ptr, mode_page_01, sizeof(mode_page_01));
return USB_STOR_TRANSPORT_GOOD;
}
// FIXME: sense buffer?
return USB_STOR_TRANSPORT_ERROR;
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
US_DEBUGP(
"SDDR09: %s medium removal. Not that I can do"
" anything about it...\n",
(srb->cmnd[4]&0x03) ? "Prevent" : "Allow");
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == READ_10) {
page = short_pack(srb->cmnd[3], srb->cmnd[2]);
page <<= 16;
page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
// convert page to block and page-within-block
lba = page >> info->blockshift;
page = page & info->blockmask;
// locate physical block corresponding to logical block
if (lba >=
(info->capacity >>
(info->pageshift + info->blockshift) ) ) {
US_DEBUGP("Error: Requested LBA %04X exceeds maximum "
"block %04X\n", lba,
(info->capacity >> (info->pageshift + info->blockshift))-1);
// FIXME: sense buffer?
return USB_STOR_TRANSPORT_ERROR;
}
pba = info->lba_to_pba[lba];
// if pba is 0, either it's really 0, in which case
// the pba-to-lba map for pba 0 will be the lba,
// or that lba doesn't exist.
if (pba==0 && info->pba_to_lba[0] != lba) {
// FIXME: sense buffer?
US_DEBUGP("Error: Requested LBA %04X has no physical block "
"mapping.\n", lba);
return USB_STOR_TRANSPORT_ERROR;
}
US_DEBUGP("READ_10: read block %04X (LBA %04X) page %01X"
" pages %d\n",
pba, lba, page, pages);
return sddr09_read_data(us,
( (pba << info->blockshift) + page) << info->pageshift,
pages, ptr, srb->use_sg);
}
// Pass TEST_UNIT_READY and REQUEST_SENSE through
if (srb->cmnd[0] != TEST_UNIT_READY &&
srb->cmnd[0] != REQUEST_SENSE)
return USB_STOR_TRANSPORT_ERROR; // FIXME: sense buffer?
for (; srb->cmd_len<12; srb->cmd_len++)
srb->cmnd[srb->cmd_len] = 0;
srb->cmnd[1] = 0x20;
string[0] = 0;
for (i=0; i<12; i++)
sprintf(string+strlen(string), "%02X ", srb->cmnd[i]);
US_DEBUGP("SDDR09: Send control for command %s\n",
string);
if ( (result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
srb->cmnd,
12)) != USB_STOR_TRANSPORT_GOOD)
return result;
US_DEBUGP("SDDR09: Control for command OK\n");
if (srb->request_bufflen == 0)
return USB_STOR_TRANSPORT_GOOD;
if (srb->sc_data_direction == SCSI_DATA_WRITE ||
srb->sc_data_direction == SCSI_DATA_READ) {
US_DEBUGP("SDDR09: %s %d bytes\n",
srb->sc_data_direction==SCSI_DATA_WRITE ?
"sending" : "receiving",
srb->request_bufflen);
result = sddr09_bulk_transport(us,
srb->sc_data_direction,
srb->request_buffer,
srb->request_bufflen, srb->use_sg);
return result;
}
return USB_STOR_TRANSPORT_GOOD;
}
