Hi everyone,
I just received a message, concerning the D-Link DU-E100. But it seems,
that the pegasus-driver does not recocnize the Device, because of
different ProdId . The Vendor (D-Link) is already listed (Vendor=07b8
D-Link2), but the ProdID is 4102 instad of 4002. To get this device to
work, is it just that simple to change that value (line 168, pegasus.h,
2.4.4)? I would try it myself, but i have to explain to an newbie, so i
want to make sure (and in addition to this it would be nice, if this
device is added to the standard-Kernel).
Ciao
Christian
ps: I am not on the List, so please CC: me. Thanks.
pps: i attached the original /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=e400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=07b8 ProdID=4102 Rev= 1.01
S: Manufacturer=USBs
S: Product=USB 10/100 Fast Ethernet
S: SerialNumber=7c3a6d
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=156mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 1ms
