On Sun, 24 Nov 2002, David Brownell wrote:
> Hmm, any reason you're not using 2.5.49 now?
Well, I just tried 2.5.49. With it, "insmod hid" gives the same two error
messages ("ctrl urb status -32 received" and "usb_submit_urb(ctrl)
failed") and then hangs.
> It might be helpful to send along the "lsusb" output, I seem to recall
> that it understands a few more things about HID.
Well, according to 'lsusb -t', the device of interest is bus 1 dev 3, but
there is no /proc/bus/usb/001/003 file, so lsusb has nothing to parse.
Here's the relevant section of /proc/bus/usb/devices, in case that helps:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=050d ProdID=0980 Rev= 0.06
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 20mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=248ms
Cheers,
Wayne
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
