Hello,
[I tried linux-usb-users to no avail, so I thought I would try here.]
I have a Belkin UPS F6C800-UNV with a USB port, USB id 050d:0980, and I'm
running Linux 2.5.46. I'm having some trouble getting this to work with
hiddev.c. Initially I would get these messages during bootup:
drivers/usb/core/hub.c: new USB device 00:11.2-1, assigned address 2
input: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-00:11.2-1
drivers/usb/core/hub.c: new USB device 00:11.2-2, assigned address 3
drivers/usb/input/hid-core.c: control queue full
drivers/usb/input/hid-core.c: control queue full
drivers/usb/input/hid-core.c: control queue full
drivers/usb/input/hid-core.c: control queue full
drivers/usb/input/hid-core.c: control queue full
drivers/usb/input/hid-core.c: ctrl urb status -32 received
drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
I noticed that 2.5.47-bk5 had some changes for another USB UPS, so I
replaced drivers/usb/input and include/linux/hiddev.h in my 2.5.46 tree
with those from 2.5.47-bk5. That got rid of the "control queue full"
messages, but it still doesn't work. That is, I still get the last two
error messages, opening /dev/usb/hiddev0 fails with -ENODEV, and
/sys/bus/usb/drivers/hiddev is empty.
Below are excerpts from my .config and boot messages. For the boot
messages, I enabled DEBUG in drivers/usb/input/hid-core.c, and I trimmed
"drivers/usb/" from each line. Any help would be appreciated.
Best wishes,
Wayne
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_LONG_TIMEOUT=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_UHCI_HCD_ALT=m
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
core/usb.c: registered new driver usbfs
core/usb.c: registered new driver hub
host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0
core/hcd-pci.c: uhci-hcd @ 00:11.2, VIA Technologies, Inc. USB
core/hcd-pci.c: irq 5, io base 0000bc00
core/hcd.c: new USB bus registered, assigned bus number 1
host/uhci-hcd.c: detected 2 ports
core/hcd.c: 00:11.2 root hub device address 1
core/usb.c: new device strings: Mfr=3, Product=2, SerialNumber=1
core/usb.c: usb_hotplug
core/usb.c: usb_new_device_R7d954997 - registering 1-0:0
core/usb.c: usb_device_probe_R29f4fccc
core/usb.c: usb_device_probe_R29f4fccc - got id
core/hub.c: USB hub found at 0
core/hub.c: 2 ports detected
core/hub.c: standalone hub
core/hub.c: ganged power switching
core/hub.c: global over-current protection
core/hub.c: Port indicators are not supported
core/hub.c: power on to power good time: 2ms
core/hub.c: hub controller current requirement: 0mA
core/hub.c: local power source is good
core/hub.c: no over-current condition exists
core/hub.c: enabling power on all ports
core/usb.c: usb_hotplug
core/hcd-pci.c: uhci-hcd @ 00:11.3, VIA Technologies, Inc. USB (#2)
core/hcd-pci.c: irq 5, io base 0000c000
core/hcd.c: new USB bus registered, assigned bus number 2
host/uhci-hcd.c: detected 2 ports
core/hcd.c: 00:11.3 root hub device address 1
core/usb.c: new device strings: Mfr=3, Product=2, SerialNumber=1
core/usb.c: usb_hotplug
core/usb.c: usb_new_device_R7d954997 - registering 2-0:0
core/usb.c: usb_device_probe_R29f4fccc
core/usb.c: usb_device_probe_R29f4fccc - got id
core/hub.c: USB hub found at 0
core/hub.c: 2 ports detected
core/hub.c: standalone hub
core/hub.c: ganged power switching
core/hub.c: global over-current protection
core/hub.c: Port indicators are not supported
core/hub.c: power on to power good time: 2ms
core/hub.c: hub controller current requirement: 0mA
core/hub.c: local power source is good
core/hub.c: no over-current condition exists
core/hub.c: enabling power on all ports
core/usb.c: usb_hotplug
core/usb.c: registered new driver hiddev
core/usb.c: registered new driver hid
input/hid-core.c: v2.0:USB HID core driver
host/uhci-hcd.c: c000: suspend_hc
register interface 'mouse' with class 'input
mice: PS/2 mouse device common for all mice
core/hub.c: port 1, portstatus 301, change 3, 1.5 Mb/s
core/hub.c: hub 0 port 1 connection change
core/hub.c: hub 0 port 1, portstatus 301, change 3, 1.5 Mb/s
core/hub.c: port 1, portstatus 301, change 2, 1.5 Mb/s
core/hub.c: port 1, portstatus 301, change 2, 1.5 Mb/s
core/hub.c: port 1, portstatus 301, change 2, 1.5 Mb/s
core/hub.c: port 1, portstatus 301, change 2, 1.5 Mb/s
core/hub.c: port 1, portstatus 303, change 0, 1.5 Mb/s
core/hub.c: new USB device 00:11.2-1, assigned address 2
core/usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
Product: USB-PS/2 Trackball
Manufacturer: Logitech
core/usb.c: usb_hotplug
core/usb.c: usb_new_device_R7d954997 - registering 1-1:0
core/usb.c: usb_device_probe_R29f4fccc
core/usb.c: usb_device_probe_R29f4fccc - got id
input/hid-core.c: HID probe called for ifnum 0
input/hid-core.c: submitting ctrl urb
INPUT[INPUT]
Field(0)
Usage(3)
Button.0001
Button.0002
Button.0003
Logical Minimum(0)
Logical Maximum(1)
Report Size(1)
Report Count(3)
Report Offset(0)
Flags( Variable Absolute )
Field(1)
Physical(GenericDesktop.0001)
Usage(2)
GenericDesktop.0030
GenericDesktop.0031
Logical Minimum(-127)
Logical Maximum(127)
Report Size(8)
Report Count(2)
Report Offset(8)
Flags( Variable Relative )
Field(2)
Usage(1)
GenericDesktop.0038
Logical Minimum(-127)
Logical Maximum(127)
Report Size(8)
Report Count(1)
Report Offset(24)
Flags( Variable Relative )
input: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-00:11.2-1
core/usb.c: usb_hotplug
core/hub.c: port 2, portstatus 301, change 3, 1.5 Mb/s
core/hub.c: hub 0 port 2 connection change
core/hub.c: hub 0 port 2, portstatus 301, change 3, 1.5 Mb/s
core/hub.c: port 2, portstatus 301, change 2, 1.5 Mb/s
core/hub.c: port 2, portstatus 301, change 2, 1.5 Mb/s
core/hub.c: port 2, portstatus 301, change 2, 1.5 Mb/s
core/hub.c: port 2, portstatus 301, change 2, 1.5 Mb/s
core/hub.c: port 2, portstatus 303, change 0, 1.5 Mb/s
core/hub.c: new USB device 00:11.2-2, assigned address 3
core/usb.c: new device strings: Mfr=4, Product=20, SerialNumber=0
Product: UPS
Manufacturer:
core/usb.c: usb_hotplug
core/usb.c: usb_new_device_R7d954997 - registering 1-2:0
core/usb.c: usb_device_probe_R29f4fccc
core/usb.c: usb_device_probe_R29f4fccc - got id
input/hid-core.c: HID probe called for ifnum 0
input/hid-core.c: unknown local item tag 0x7
input/hid-core.c: unknown local item tag 0x7
input/hid-core.c: unknown local item tag 0x7
input/hid-core.c: unknown local item tag 0x7
input/hid-core.c: submitting ctrl urb
core/hcd.c: giveback urb ded138c0 status -32 len 0
input/hid-core.c: ctrl urb status -32 received
input/hid-core.c: empty report
input/hid-core.c: submitting ctrl urb
input/hid-core.c: usb_submit_urb(ctrl) failed
input/hid-core.c: timeout waiting for ctrl or out queue to clear
core/hcd.c: (no bus?): hcd_unlink_urb fail -22
input/hid-core.c: timeout waiting for ctrl or out queue to clear
core/hcd.c: (no bus?): hcd_unlink_urb fail -22
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
