Mahlzeit
When attaching 52 readers only a part is recognized and numbered. The used kernel is probably a 2.4.20-pre19 or a 2.4.20. I've appended excerpts from the log, (full log I have is about 15kB) which contains messages I've never seen. Do the provide information about where the problem is? Thanks endergone Zwiebeltuete usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11 ... usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5 ... usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 10 ... hub.c: new USB device 00:1d.1-2.1, assigned address 4 usb.c: USB device 4 (vend/prod 0xc4b/0x100) is not claimed by any active driver. hub.c: new USB device 00:1d.1-2.2, assigned address 5 usb.c: USB device 5 (vend/prod 0xc4b/0x100) is not claimed by any active driver. hub.c: new USB device 00:1d.1-2.3, assigned address 6 usb.c: USB device 6 (vend/prod 0xc4b/0x100) is not claimed by any active driver. hub.c: new USB device 00:1d.1-2.4, assigned address 7 usb.c: USB device 7 (vend/prod 0xc4b/0x100) is not claimed by any active driver. usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: usb_hub_port_status (3) failed (err = -6) hub.c: connect-debounce failed, port 5 disabled usb-uhci.c: ENXIO 80000300, flags 0, urb ced26a00, burb ced26980 hub.c: cannot disable port 5 of hub 3 (err = -6) usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: usb_hub_port_status (3) failed (err = -6) usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: usb_hub_port_status (3) failed (err = -6) usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: get_hub_status failed usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: usb_hub_port_status (3) failed (err = -6) usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: usb_hub_port_status (3) failed (err = -6) usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: usb_hub_port_status (3) failed (err = -6) usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: usb_hub_port_status (3) failed (err = -6) usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: usb_hub_port_status (3) failed (err = -6) usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: usb_hub_port_status (3) failed (err = -6) usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: usb_hub_port_status (3) failed (err = -6) usb-uhci.c: ENXIO 80000380, flags 0, urb ced26a00, burb ced26980 hub.c: get_hub_status failed usb-uhci.c: ENXIO 80000280, flags 0, urb ced26980, burb ced26a00 ... usb-uhci.c: ENXIO 80000280, flags 0, urb ced26980, burb ced26a00 hub.c: new USB device 00:1d.1-1.1, assigned address 8 usb.c: USB device 8 (vend/prod 0xc4b/0x100) is not claimed by any active driver. hub.c: new USB device 00:1d.1-1.2, assigned address 9 usb.c: USB device 9 (vend/prod 0xc4b/0x100) is not claimed by any active driver. usb-uhci.c: ENXIO 80000280, flags 0, urb ced26b80, burb ced26b00 hub.c: usb_hub_port_status (2) failed (err = -6) usb-uhci.c: ENXIO 80000200, flags 0, urb ced26b80, burb ced26b00 hub.c: new USB device 00:1d.1-1.3, assigned address 10 usb.c: USB device 10 (vend/prod 0xc4b/0x100) is not claimed by any active driver. hub.c: new USB device 00:1d.1-1.4, assigned address 11 usb.c: USB device 11 (vend/prod 0xc4b/0x100) is not claimed by any active driver. hub.c: new USB device 00:1d.1-1.5, assigned address 12 usb.c: USB device 12 (vend/prod 0xc4b/0x100) is not claimed by any active driver. hub.c: new USB device 00:1d.1-1.6, assigned address 13 usb.c: USB device 13 (vend/prod 0xc4b/0x100) is not claimed by any active driver. usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 usbserial.c: USB Serial support registered for Reiner SCT Cyberjack USB card reader usbserial.c: Reiner SCT Cyberjack USB card reader converter detected usbserial.c: Reiner SCT Cyberjack USB card reader converter now attached to ttyUSB0 (or usb/tts/0 for devfs) ... ------------------------------------------------------- This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will allow you to extend the highest allowed 128 bit encryption to all your clients even if they use browsers that are limited to 40 bit encryption. Get a guide here:http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0030en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
