On Wed, 5 Feb 2003, Matthew Dharm wrote:
Matthew,
thanks for your prompt reply. My appologies for my somewhat tardy reply --
a busy week and all...
> The device is babbling on the bus... under some situations.
>
> I need to see more logs to be sure what's going on. I need the entire log
> from the insertion.
I have attached this as it is a little long to insert here.
Thanks,
Mikal
--
Michael Still ([EMAIL PROTECTED]) | Stage 1: Steal underpants
http://www.stillhq.com | Stage 2: ????
UTC + 11 | Stage 3: Profit
** Feb 9 08:22:10 deathstar syslogd 1.4.1#11: restart.
** Feb 9 08:22:10 deathstar kernel: klogd 1.4.1#11, log source = /proc/kmsg started.
** Feb 9 08:22:10 deathstar kernel: Cannot find map file.
** Feb 9 08:22:10 deathstar kernel: No module symbols loaded - kernel modules not
enabled.
Linux version 2.5.59 (root@deathstar) (gcc version 2.95.4 20011002 (Debian
prerelease)) #3 SMP Wed Feb 5 16:30:56 EST 2003
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dd400 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
BIOS-e820: 0000000017ff0000 - 0000000017ffec00 (ACPI data)
BIOS-e820: 0000000017ffec00 - 0000000018000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
383MB LOWMEM available.
On node 0 totalpages: 98288
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 94192 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: RSDP (v000 PTLTD ) @ 0x000f74b0
ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x17ff5ed3
ACPI: FADT (v001 IBM TP-X21 01540.00000) @ 0x17ffeb65
ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x17ffebd9
ACPI: DSDT (v001 IBM TP-X21 01540.00000) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=2.5.59 ro root=303
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 696.840 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1376.25 BogoMIPS
Memory: 383768k/393152k available (2778k kernel code, 8620k reserved, 1262k data, 136k
init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.76 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Starting migration thread for cpu 0
CPUS done 32
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
mtrr: v2.0 (20020519)
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030109
tbxface-0098 [03] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control
Methods:.........................................................................................................................................................................................................................................................................................................................................
Table [DSDT] - 1095 Objects with 50 Devices 329 Methods 19 Regions
ACPI Namespace successfully loaded at root c05417dc
evxfevnt-0073 [04] acpi_enable : Transition to ACPI mode successful
evgpe-0262: *** Info: GPE Block0 defined as GPE0 to GPE15
Executing all Device _STA and_INI methods:.........dswstate-0190 [13] ds_result_pop
: Result stack is empty! State=d7e1d828
dswexec-0085 [13] ds_get_predicate_value: Could not get result from predicate
evaluation, AE_AML_NO_RETURN_VALUE
psparse-0451 [12] ps_parse_loop : Invoked method did not return a value,
AE_AML_NO_RETURN_VALUE
psparse-0455 [12] ps_parse_loop : get_predicate Failed,
AE_AML_NO_RETURN_VALUE
psparse-1102: *** Error: Method execution failed [\_SB_.PCI0._INI] (Node c1434b14),
AE_AML_NO_RETURN_VALUE
nsinit-0378 [06] ns_init_one_device : \_SB_.PCI0._INI failed:
AE_AML_NO_RETURN_VALUE
....................................
45 Devices found containing: 45 _STA, 5 _INI methods
Completing Region/Field/Buffer/Package
initialization:......................................................................................................................................
Initialized 10/19 Regions 62/79 Fields 39/41 Buffers 23/23 Packages (1095 nodes)
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 9 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Power Resource [PSIO] (on)
ACPI: Power Resource [PSER] (off)
ACPI: Embedded Controller [EC] (gpe 9)
pci_bind-0191 [12] acpi_pci_bind : Device 00:00:04.00 not present in PCI
namespace
Linux Plug and Play Support v0.94 (c) Adam Belay
block request queues:
128 requests per read queue
128 requests per write queue
8 requests per batch
enter congestion at 15
exit congestion at 17
SCSI subsystem driver Revision: 1.00
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
SBF: ACPI BOOT descriptor is wrong length (39)
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
Enabling SEP on CPU 0
aio_setup: sizeof(struct page) = 40
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
udf: registering filesystem
Limiting direct PCI/PCI transfers.
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Intel 440BX chipset
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] Initialized radeon 1.7.0 20020828 on minor 0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Intel(R) PRO/100 Network Driver - version 2.1.29-k1
Copyright (c) 2002 Intel Corporation
e100: eth0: Intel(R) PRO/100 SP Mobile Combo Adapter
Hardware receive checksums enabled
cpu cycle saver enabled
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100%% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio
hda: HITACHI_DK23DA-20B, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: host protected area => 1
hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=41344/15/63, UDMA(33)
hda: hda1 hda2 hda3
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus]
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0
uhci-hcd 00:07.2: Intel Corp. 82371AB/EB/MB PIIX4
uhci-hcd 00:07.2: irq 11, io base 00001820
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000006
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000006
drivers/usb/host/uhci-hcd.c: detected 2 ports
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
Advanced Linux Sound Architecture Driver Version 0.9.0rc6 (Tue Dec 17 19:01:13 2002
UTC).
ALSA device list:
No soundcards found.
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP: Hash tables configured (established 16384 bind 21845)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 136k freed
Adding 529192k swap on /dev/hda2. Priority:-1 extents:1
** Feb 9 08:22:11 deathstar irattach: executing: '/sbin/modprobe irda0'
** Feb 9 08:22:11 deathstar irattach: + modprobe: QM_MODULES: Function not
implemented
** Feb 9 08:22:11 deathstar irattach: +
** Feb 9 08:22:11 deathstar irattach: + modprobe: QM_MODULES: Function not
implemented
** Feb 9 08:22:11 deathstar irattach: +
** Feb 9 08:22:11 deathstar irattach: + modprobe: Can't locate module irda0
** Feb 9 08:22:11 deathstar irattach: + Note: /etc/modules.conf is more recent than
/lib/modules/2.5.59/modules.dep
** Feb 9 08:22:11 deathstar irattach: Trying to load module irda0 exited with status
255
** Feb 9 08:22:11 deathstar irattach: executing: 'echo deathstar >
/proc/sys/net/irda/devname'
** Feb 9 08:22:11 deathstar irattach: Setting devname to deathstar exited with status
1
** Feb 9 08:22:11 deathstar irattach: executing: 'echo 1 >
/proc/sys/net/irda/discovery'
** Feb 9 08:22:11 deathstar irattach: Setting discovery to 1 exited with status 1
** Feb 9 08:22:11 deathstar irattach: Starting device irda0
** Feb 9 08:22:11 deathstar lpd[235]: restarted
** Feb 9 08:22:11 deathstar irattach: Stopping device irda0
** Feb 9 08:22:12 deathstar irattach: exiting ...
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377 0x3b8-0x3df
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
** Feb 9 08:22:13 deathstar xfs: ignoring font path element
/usr/lib/X11/fonts/cyrillic/ (unreadable)
** Feb 9 08:22:14 deathstar xfs: ignoring font path element /usr/lib/X11/fonts/CID
(unreadable)
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states)
ACPI: Thermal Zone [THM0] (51 C)
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 1, assigned address 2
usb 1-1: Product: General Purpose USB Hub
hub 1-1:0: USB hub found
hub 1-1:0: 2 ports detected
hub 1-1:0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 2, assigned address 3
usb 1-1.2: Product: Sony DSC
usb 1-1.2: Manufacturer: Sony
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Sony Model: Sony DSC Rev: 3.28
Type: Direct-Access ANSI SCSI revision: 02
** Feb 9 08:28:43 deathstar last message repeated 9 times
SCSI device sda: 253696 512-byte hdwr sectors (130 MB)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
sda: test WP failed, assume Write Enabled
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
SCSI device (ioctl) reports ILLEGAL REQUEST.
SCSI device sda: 253696 512-byte hdwr sectors (130 MB)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
04 00
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
sda: test WP failed, assume Write Enabled
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
SCSI device sda: 253696 512-byte hdwr sectors (130 MB)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
sda: test WP failed, assume Write Enabled
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c15212a0] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
[c1521270] link (01521212) element (01522060)
0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0
EndPt=2 Dev=3, PID=69(IN) (buf=00516e00)
sda:<3>Buffer I/O error on device sd(8,0), logical block 0
