You've now given me two separate logs. One shows all the usb-storage debugging, and then this one only shows the HCD debugging.
I need the full logs like the first ones you sent me. Matt On Sun, Feb 09, 2003 at 08:38:21AM +1100, Michael Still wrote: > On Wed, 5 Feb 2003, Matthew Dharm wrote: > > Matthew, > > thanks for your prompt reply. My appologies for my somewhat tardy reply -- > a busy week and all... > > > The device is babbling on the bus... under some situations. > > > > I need to see more logs to be sure what's going on. I need the entire log > > from the insertion. > > I have attached this as it is a little long to insert here. > > Thanks, > Mikal > > -- > > Michael Still ([EMAIL PROTECTED]) | Stage 1: Steal underpants > http://www.stillhq.com | Stage 2: ???? > UTC + 11 | Stage 3: Profit > ** Feb 9 08:22:10 deathstar syslogd 1.4.1#11: restart. > ** Feb 9 08:22:10 deathstar kernel: klogd 1.4.1#11, log source = /proc/kmsg started. > ** Feb 9 08:22:10 deathstar kernel: Cannot find map file. > ** Feb 9 08:22:10 deathstar kernel: No module symbols loaded - kernel modules not >enabled. > Linux version 2.5.59 (root@deathstar) (gcc version 2.95.4 20011002 (Debian >prerelease)) #3 SMP Wed Feb 5 16:30:56 EST 2003 > Video mode to be used for restore is ffff > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000dd400 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable) > BIOS-e820: 0000000017ff0000 - 0000000017ffec00 (ACPI data) > BIOS-e820: 0000000017ffec00 - 0000000018000000 (ACPI NVS) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > 383MB LOWMEM available. > On node 0 totalpages: 98288 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 94192 pages, LIFO batch:16 > HighMem zone: 0 pages, LIFO batch:1 > ACPI: RSDP (v000 PTLTD ) @ 0x000f74b0 > ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x17ff5ed3 > ACPI: FADT (v001 IBM TP-X21 01540.00000) @ 0x17ffeb65 > ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x17ffebd9 > ACPI: DSDT (v001 IBM TP-X21 01540.00000) @ 0x00000000 > ACPI: BIOS passes blacklist > ACPI: MADT not present > IBM machine detected. Enabling interrupts during APM calls. > IBM machine detected. Disabling SMBus accesses. > Building zonelist for node : 0 > Kernel command line: BOOT_IMAGE=2.5.59 ro root=303 > Local APIC disabled by BIOS -- reenabling. > Could not enable APIC! > Initializing CPU#0 > PID hash table entries: 2048 (order 11: 16384 bytes) > Detected 696.840 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 1376.25 BogoMIPS > Memory: 383768k/393152k available (2778k kernel code, 8620k reserved, 1262k data, >136k init, 0k highmem) > Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) > Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > -> /dev > -> /dev/console > -> /root > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 256K > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > CPU0: Intel Pentium III (Coppermine) stepping 06 > per-CPU timeslice cutoff: 731.76 usecs. > task migration cache decay timeout: 1 msecs. > SMP motherboard not detected. > Local APIC not detected. Using dummy APIC emulation. > Starting migration thread for cpu 0 > CPUS done 32 > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > mtrr: v2.0 (20020519) > PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 > PCI: Using configuration type 1 > BIO: pool of 256 setup, 14Kb (56 bytes/bio) > biovec pool[0]: 1 bvecs: 256 entries (12 bytes) > biovec pool[1]: 4 bvecs: 256 entries (48 bytes) > biovec pool[2]: 16 bvecs: 256 entries (192 bytes) > biovec pool[3]: 64 bvecs: 256 entries (768 bytes) > biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) > biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) > ACPI: Subsystem revision 20030109 > tbxface-0098 [03] acpi_load_tables : ACPI Tables successfully acquired > Parsing all Control >Methods:......................................................................................................................................................................................................................................................................................................................................... > Table [DSDT] - 1095 Objects with 50 Devices 329 Methods 19 Regions > ACPI Namespace successfully loaded at root c05417dc > evxfevnt-0073 [04] acpi_enable : Transition to ACPI mode successful > evgpe-0262: *** Info: GPE Block0 defined as GPE0 to GPE15 > Executing all Device _STA and_INI methods:.........dswstate-0190 [13] ds_result_pop > : Result stack is empty! State=d7e1d828 > dswexec-0085 [13] ds_get_predicate_value: Could not get result from predicate >evaluation, AE_AML_NO_RETURN_VALUE > psparse-0451 [12] ps_parse_loop : Invoked method did not return a value, >AE_AML_NO_RETURN_VALUE > psparse-0455 [12] ps_parse_loop : get_predicate Failed, >AE_AML_NO_RETURN_VALUE > psparse-1102: *** Error: Method execution failed [\_SB_.PCI0._INI] (Node c1434b14), >AE_AML_NO_RETURN_VALUE > nsinit-0378 [06] ns_init_one_device : \_SB_.PCI0._INI failed: >AE_AML_NO_RETURN_VALUE > .................................... > 45 Devices found containing: 45 _STA, 5 _INI methods > Completing Region/Field/Buffer/Package >initialization:...................................................................................................................................... > Initialized 10/19 Regions 62/79 Fields 39/41 Buffers 23/23 Packages (1095 nodes) > ACPI: Interpreter enabled > ACPI: Using PIC for interrupt routing > ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *11) > ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *11) > ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *11) > ACPI: PCI Interrupt Link [LNKD] (IRQs 9 *11) > ACPI: PCI Root Bridge [PCI0] (00:00) > PCI: Probing PCI hardware (bus 00) > ACPI: Power Resource [PSIO] (on) > ACPI: Power Resource [PSER] (off) > ACPI: Embedded Controller [EC] (gpe 9) > pci_bind-0191 [12] acpi_pci_bind : Device 00:00:04.00 not present in PCI >namespace > Linux Plug and Play Support v0.94 (c) Adam Belay > block request queues: > 128 requests per read queue > 128 requests per write queue > 8 requests per batch > enter congestion at 15 > exit congestion at 17 > SCSI subsystem driver Revision: 1.00 > drivers/usb/core/usb.c: registered new driver usbfs > drivers/usb/core/usb.c: registered new driver hub > PCI: Using ACPI for IRQ routing > PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' > SBF: ACPI BOOT descriptor is wrong length (39) > SBF: Simple Boot Flag extension found and enabled. > SBF: Setting boot flags 0x1 > Enabling SEP on CPU 0 > aio_setup: sizeof(struct page) = 40 > Journalled Block Device driver loaded > Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). > udf: registering filesystem > Limiting direct PCI/PCI transfers. > Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled > pty: 256 Unix98 ptys configured > Linux agpgart interface v0.100 (c) Dave Jones > agpgart: Detected Intel 440BX chipset > agpgart: Maximum main memory to use for agp memory: 321M > agpgart: AGP aperture is 64M @ 0xf8000000 > [drm] Initialized radeon 1.7.0 20020828 on minor 0 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a National Semiconductor PC87306 > Intel(R) PRO/100 Network Driver - version 2.1.29-k1 > Copyright (c) 2002 Intel Corporation > > e100: eth0: Intel(R) PRO/100 SP Mobile Combo Adapter > Hardware receive checksums enabled > cpu cycle saver enabled > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PIIX4: IDE controller at PCI slot 00:07.1 > PIIX4: chipset revision 1 > PIIX4: not 100%% native mode: will probe irqs later > ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio > hda: HITACHI_DK23DA-20B, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: host protected area => 1 > hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=41344/15/63, UDMA(33) > hda: hda1 hda2 hda3 > Linux Kernel Card Services 3.1.22 > options: [pci] [cardbus] > drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 > uhci-hcd 00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 > uhci-hcd 00:07.2: irq 11, io base 00001820 > Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. > uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1 > Yenta IRQ list 04b8, PCI irq11 > Socket status: 30000006 > Yenta IRQ list 04b8, PCI irq11 > Socket status: 30000006 > drivers/usb/host/uhci-hcd.c: detected 2 ports > hub 1-0:0: USB hub found > hub 1-0:0: 2 ports detected > Initializing USB Mass Storage driver... > drivers/usb/core/usb.c: registered new driver usb-storage > USB Mass Storage support registered. > mice: PS/2 mouse device common for all mice > input: PS/2 Generic Mouse on isa0060/serio1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > input: AT Set 2 keyboard on isa0060/serio0 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Advanced Linux Sound Architecture Driver Version 0.9.0rc6 (Tue Dec 17 19:01:13 2002 >UTC). > ALSA device list: > No soundcards found. > NET4: Linux TCP/IP 1.0 for NET4.0 > IP: routing cache hash table of 2048 buckets, 32Kbytes > TCP: Hash tables configured (established 16384 bind 21845) > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > VFS: Mounted root (ext2 filesystem) readonly. > Freeing unused kernel memory: 136k freed > Adding 529192k swap on /dev/hda2. Priority:-1 extents:1 > ** Feb 9 08:22:11 deathstar irattach: executing: '/sbin/modprobe irda0' > ** Feb 9 08:22:11 deathstar irattach: + modprobe: QM_MODULES: Function not >implemented > ** Feb 9 08:22:11 deathstar irattach: + > ** Feb 9 08:22:11 deathstar irattach: + modprobe: QM_MODULES: Function not >implemented > ** Feb 9 08:22:11 deathstar irattach: + > ** Feb 9 08:22:11 deathstar irattach: + modprobe: Can't locate module irda0 > ** Feb 9 08:22:11 deathstar irattach: + Note: /etc/modules.conf is more recent than >/lib/modules/2.5.59/modules.dep > ** Feb 9 08:22:11 deathstar irattach: Trying to load module irda0 exited with >status 255 > ** Feb 9 08:22:11 deathstar irattach: executing: 'echo deathstar > >/proc/sys/net/irda/devname' > ** Feb 9 08:22:11 deathstar irattach: Setting devname to deathstar exited with >status 1 > ** Feb 9 08:22:11 deathstar irattach: executing: 'echo 1 > >/proc/sys/net/irda/discovery' > ** Feb 9 08:22:11 deathstar irattach: Setting discovery to 1 exited with status 1 > ** Feb 9 08:22:11 deathstar irattach: Starting device irda0 > ** Feb 9 08:22:11 deathstar lpd[235]: restarted > ** Feb 9 08:22:11 deathstar irattach: Stopping device irda0 > ** Feb 9 08:22:12 deathstar irattach: exiting ... > cs: IO port probe 0x0c00-0x0cff: clean. > cs: IO port probe 0x0800-0x08ff: clean. > cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377 0x3b8-0x3df >0x4d0-0x4d7 > cs: IO port probe 0x0a00-0x0aff: clean. > ** Feb 9 08:22:13 deathstar xfs: ignoring font path element >/usr/lib/X11/fonts/cyrillic/ (unreadable) > ** Feb 9 08:22:14 deathstar xfs: ignoring font path element /usr/lib/X11/fonts/CID >(unreadable) > drivers/usb/core/usb.c: registered new driver hiddev > drivers/usb/core/usb.c: registered new driver hid > drivers/usb/input/hid-core.c: v2.0:USB HID core driver > CSLIP: code copyright 1989 Regents of the University of California > PPP generic driver version 2.4.2 > ACPI: AC Adapter [AC] (on-line) > ACPI: Battery Slot [BAT0] (battery present) > ACPI: Power Button (FF) [PWRF] > ACPI: Lid Switch [LID] > ACPI: Sleep Button (CM) [SLPB] > ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states) > ACPI: Thermal Zone [THM0] (51 C) > hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 > hub 1-0:0: new USB device on port 1, assigned address 2 > usb 1-1: Product: General Purpose USB Hub > hub 1-1:0: USB hub found > hub 1-1:0: 2 ports detected > hub 1-1:0: debounce: port 2: delay 100ms stable 4 status 0x101 > hub 1-1:0: new USB device on port 2, assigned address 3 > usb 1-1.2: Product: Sony DSC > usb 1-1.2: Manufacturer: Sony > scsi0 : SCSI emulation for USB Mass Storage devices > Vendor: Sony Model: Sony DSC Rev: 3.28 > Type: Direct-Access ANSI SCSI revision: 02 > ** Feb 9 08:28:43 deathstar last message repeated 9 times > SCSI device sda: 253696 512-byte hdwr sectors (130 MB) > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > sda: test WP failed, assume Write Enabled > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > SCSI device (ioctl) reports ILLEGAL REQUEST. > > SCSI device sda: 253696 512-byte hdwr sectors (130 MB) > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > 04 00 > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > sda: test WP failed, assume Write Enabled > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > SCSI device sda: 253696 512-byte hdwr sectors (130 MB) > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > sda: test WP failed, assume Write Enabled > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c15212a0] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT1 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > [c1521270] link (01521212) element (01522060) > 0: [c1522060] link (00000001) e3 SPD IOC Stalled Babble Length=3 MaxLen=3 DT0 >EndPt=2 Dev=3, PID=69(IN) (buf=00516e00) > > sda:<3>Buffer I/O error on device sd(8,0), logical block 0 -- Matthew Dharm Home: [EMAIL PROTECTED] Maintainer, Linux USB Mass Storage Driver I need a computer? -- Customer User Friendly, 2/19/1998
msg11428/pgp00000.pgp
Description: PGP signature
