Hi,
I can see in the archives that a problem with the USB storage driver
has been discussed recently. I just got a USB 2.0 hard drive enclosure
(made by a company called Anydisk), and it works out of the box with
the usb-storage driver off all USB hosts I have tried so far (EHCI on
a VIA chipset, UHCI on an Intel PIIX4). Power supply may be a problem,
but I use a dedicated external supply for the disk.
I do notice, however, that sometimes during heavy use (copying files,
calculating MD5 checksums, even just reading files in chunks of 60MB
with several minutes of pauses) causes a timeout, and directly
afterwards an oops. This is the relevant section of the log:
> usb_control/bulk_msg: timeout
> usb_control/bulk_msg: timeout
> usb_control/bulk_msg: timeout
> hub.c: port 1, portstatus 503, change 10, 480 Mb/s
> ehci-hcd 00:09.2: devpath 2.1 ep0out 3strikes
> hub.c: USB device not accepting new address (error=-71)
> usb-storage: host_reset() requested but not implemented
> scsi: device set offline - command error recover failed: host 2 channel
> 0 id 0 lun 0
> SCSI disk error : host 2 channel 0 id 0 lun 0 return code = 6070000
> I/O error: dev 08:01, sector 11917048
> I/O error: dev 08:01, sector 11917056
> I/O error: dev 08:01, sector 11917296
> I/O error: dev 08:01, sector 37888
> journal-601, buffer write failed
> kernel BUG at prints.c:334!
> invalid operand: 0000
> CPU: 0
> EIP: 0010:[<f0972879>] Tainted: PF
> EFLAGS: 00010286
> eax: 00000024 ebx: f09867a0 ecx: ec77c000 edx: 00000001
> esi: e8a3c400 edi: 00000000 ebp: e8a3c400 esp: c185ded8
> ds: 0018 es: 0018 ss: 0018
> Process kupdated (pid: 6, stackpage=c185d000)
> Stack: f0984c3a f0988920 f09867a0 c185defc f5064dd4 00000003 f097ce5f
> e8a3c400
> f09867a0 0000002c 00000012 00000010 00000000 f5064e08 f5064dfc
> 00000004
> 00000000 0000002d d12ec6c0 f09807ce e8a3c400 f5064dd4 00000001
> c185df98
> Call Trace: [<f0984c3a>] [<f0988920>] [<f09867a0>] [<f097ce5f>]
> [<f09867a0>]
> [<f09807ce>] [<f097fa1f>] [<f098776f>] [<f096feb5>] [<c0137151>]
> [<c01366be>]
> [<c0136945>] [<c01055e8>]
>
> Code: 0f 0b 4e 01 40 4c 98 f0 68 20 89 98 f0 85 f6 74 16 0f b7 46
> I/O error: dev 08:01, sector 11917048
I see this with kernels 2.4.21-rc2 and rc6 just the same. 2.5.70 is
even worse, it just stalls the access (very early on, not after
several 100MB) without any log messages, and CPU load diverges without
any useful information showing up with "top". It happens only with the
EHCI driver, in full-speed mode I haven't yet been able to produce
this error (maybe due to the relaxed timing).
I can write to the disk for ages without any problems, it's the
reading that causes me headaches. I do notice, however, that when I
mount the disk read-only (such that the access time isn't updated
after every read), the problem occurs much less often. It seems to me
that a simultaneous read and write can provoke this fault with
relatively high probability.
Turning on usb-storage logging isn't much use, I haven't seen any
timeout/oops with it enabled, probably because it changes the timings.
I don't think it's a hardware or thermal problem, given the
symptoms. Has anyone seen anything like this? Any help would be
appreciated, and a quick fix too!
Andras
===========================================================================
Major Andras
e-mail: [EMAIL PROTECTED]
www: http://andras.webhop.org/
===========================================================================
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
