> I mean 2.5.71 (although usb-2.5.70.bk-patches* will probably do just as
> well -- and I think you do need both). You can get 2.5.70 at
> ftp.kernel.org, and the combined patches up to the current 2.5.71 are in
> the pub/linux/kernel/v2.5/testing/cset directory.
I couldn't make sense of the cset directory, so I took the bk8
snapshot. I still can't do anything useful with the harddrive -- it
mounts ok, but then after the first few accesses the disk stops (the
activity light goes dark) while the computer waits (with a system load
of 2) for the data to come in. After some time (30sec or so) this gets
written to the log:
> scsi: Device offlined - not ready after error recovery: host 2 channel 0 id 0 lun 0
> SCSI disk error : <2 0 0 0> return code = 0x6050000
> end_request: I/O error, dev sda, sector 47975616
> Buffer I/O error on device sda1, logical block 5996948
> SCSI disk error : <2 0 0 0> return code = 0x70000
> end_request: I/O error, dev sda, sector 5816
> journal-601, buffer write failed
The last line (and the oops that comes afterwards) come from reiserfs,
which is very unhappy with the situation as I can imagine.
Hope this helps,
Andras
===========================================================================
Major Andras
e-mail: [EMAIL PROTECTED]
www: http://andras.webhop.org/
===========================================================================
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
