Mark Frazer <[EMAIL PROTECTED]> [03/07/18 14:30]: > I have a new device that I am going to be writing a driver for. The device > supposedly works fine as there are windows drivers for it. > > I get the following in my syslog with CONFIG_USB_DEBUG turned on: >hub.c: connect-debounce failed, port 4 disabled
So, I've got myself a usb mouse and compared the output. The connect-bounce message never appears in when the mouse is plugged/unplugged. Google's showing lots of complaints about this since 2.4.19. I'm using 2.4.21. I just checked 2.4.22-pre7 and it still is happening. I only see these messages when the device is unplugged. Reading hub.c leads me to believe I should only see this at plug time. Any idea as to why it happens at unplug time? thanks -mark -- Like most of life's problems, this one can be solved with bending. - Bender ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
