On Sat, 18 Oct 2003, Phil Dibowitz wrote: > One more 'bug' I've noticed... not sure if this is specific to this > patch, or my recently upgraded -test7 kernel, or... > > If I connect the camera it gets added at /dev/sda1. If I disconnect the > camera, the usb drivers tell me: > > ~ Oct 18 20:04:36 rider kernel: usb 1-2: USB disconnect, address 3 > > If I then connect the camera again later, it becomes /dev/sdb1 > > And if you repeat the process, it will become /dev/sdc1 and so on and so > forth. > > This is quite frustrating. I'm not sure if this is a SCSI bug or a USB > bug. I don't remember this happening before though... > > Thoughts?
It is a SCSI bug, and it was recently tracked down by Matthias Urlichs. See http://sourceforge.net/mailarchive/message.php?msg_id=6252693 Alan Stern ------------------------------------------------------- This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room http://www.enterpriselinuxforum.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
