We are developing a new device that enumerates correctly under winXP, but it is not working with linux. With 2.6.0-test8 we are getting this output in dmesg:
==== hub 2-2:1.0: enabling power on all ports hub 2-2:1.0: port 3, status 301, change 1, 1.5 Mb/s hub 2-2:1.0: debounce: port 3: delay 100ms stable 4 status 0x301 hub 2-2:1.0: new USB device on port 3, assigned address 3 ohci_hcd 0000:02:01.0: urb cfd19200 path 2.3 ep0out 5fc20000 cc 5 --> status -110 ohci_hcd 0000:02:01.0: urb cfd19200 path 2.3 ep0out 5fc20000 cc 5 --> status -110 usb 2-2.3: device not accepting address 3, error -110 hub 2-2:1.0: new USB device on port 3, assigned address 4 ohci_hcd 0000:02:01.0: urb cfd19200 path 2.3 ep0out 5fc20000 cc 5 --> status -110 ohci_hcd 0000:02:01.0: urb cfd19200 path 2.3 ep0out 5fc20000 cc 5 --> status -110 usb 2-2.3: device not accepting address 4, error -110 drivers/usb/host/uhci-hcd.c: ef80: suspend_hc ==== We believe that the above ohci_hcd output is coming from ohci-q.c ed_halted() line 807 Does the above provide enough info to understand the problem, and if not what extra things should we print to figure it out? Thanks Sari ------------------------------------------------------- This SF.net email is sponsored by OSDN developer relations Here's your chance to show off your extensive product knowledge We want to know what you know. Tell us and you have a chance to win $100 http://www.zoomerang.com/survey.zgi?HRPT1X3RYQNC5V4MLNSV3E54 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
