On Wed, 2003-12-31 at 13:24, David Brownell wrote:
> Steve Bangert wrote:
> >
> >
> > The same hardware hotplugs in 2.4, In 2.6.1-rc1 if I try to manually
> > load the cdc-acm module I get:
> >
> > [EMAIL PROTECTED] class]# /sbin/insmod cdc-acm.ko
> > Error inserting 'cdc-acm.ko': -1 Unknown symbol in module
>
> What symbol did syslog report was "unknown"?
[EMAIL PROTECTED] skb]$ dmesg
Linux version 2.6.1-rc1 ([EMAIL PROTECTED]) (gcc version 3.2.2
20030222 (Red Hat Linux 3.2.2-5)) #2 Wed Dec 31 05:16:42 PST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec00800 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee00400 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
128MB LOWMEM available.
On node 0 totalpages: 32768
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 28672 pages, LIFO batch:7
HighMem zone: 0 pages, LIFO batch:1
DMI not present.
Building zonelist for node : 0
Kernel command line: ro root=/dev/hde3
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 332.367 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 127204k/131072k available (1211k kernel code, 3308k reserved,
548k data, 104k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay loop... 657.40 BogoMIPS
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 008001bf 808009bf 00000000
00000000
CPU: After vendor identify, caps: 008001bf 808009bf 00000000
00000000
Enabling old style K6 write allocation for 128 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After all inits, caps: 008001bf 808009bf 00000000 00000000
CPU: AMD-K6(tm) 3D processor stepping 00
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc87e, last bus=0
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
VFS: Disk quotas dquot_6.5.1
Limiting direct PCI/PCI transfers.
pty: 512 Unix98 ptys configured
Real Time Clock Driver v1.12
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PDC20269: IDE controller at PCI slot 0000:00:0d.0
PDC20269: chipset revision 2
PDC20269: ROM enabled at 0xfc000000
PDC20269: 100% native mode on irq 9
ide2: BM-DMA at 0xdcc0-0xdcc7, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xdcc8-0xdccf, BIOS settings: hdg:pio, hdh:pio
hde: IBM-DTLA-307015, ATA DISK drive
ide2 at 0xdcf8-0xdcff,0xdcf2 on irq 9
hdg: SONY CD-ROM CDU5221, ATAPI CD/DVD-ROM drive
ide3 at 0xdce0-0xdce7,0xdcda on irq 9
hde: max request size: 128KiB
hde: 30003120 sectors (15361 MB) w/1916KiB Cache, CHS=29765/16/63,
UDMA(100)
hde: hde1 hde2 hde3 hde4 < hde5 >
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
EXT2-fs warning (device hde3): ext2_fill_super: mounting ext3 filesystem
as ext2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 104k freed
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Adding 257000k swap on /dev/hde5. Priority:-1 extents:1
request_module: failed /sbin/modprobe -- block-major-8-1. error = 256
SCSI subsystem initialized
kjournald starting. Commit interval 5 seconds
EXT3 FS on hde2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kudzu: numerical sysctl 1 23 is obsolete.
ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:0c.0: OHCI Host Controller
ohci_hcd 0000:00:0c.0: irq 11, pci mem c880d000
ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:0c.1: OHCI Host Controller
ohci_hcd 0000:00:0c.1: irq 10, pci mem c880f000
ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 2
hub 1-0:1.0: new USB device on port 1, assigned address 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: configuration #2 chosen from 2 choices
request_module: failed /sbin/modprobe -- char-major-4-64. error = 256
hub 2-0:1.0: new USB device on port 1, assigned address 2
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Explorer]
on usb-0000:00:0c.1-1
ip_tables: (C) 2000-2002 Netfilter core team
request_module: failed /sbin/modprobe -- block-major-8-1. error = 256
request_module: failed /sbin/modprobe -- char-major-6-0. error = 256
request_module: failed /sbin/modprobe -- char-major-4. error = 256
request_module: failed /sbin/modprobe -- char-major-4. error = 256
request_module: failed /sbin/modprobe -- char-major-188-0. error = 256
request_module: failed /sbin/modprobe -- char-major-188-13. error = 256
request_module: failed /sbin/modprobe -- char-major-10-134. error = 256
atkbd.c: Unknown key released (translated set 2, code 0x7a on
isa0060/serio0).
atkbd.c: Unknown key released (translated set 2, code 0x7a on
isa0060/serio0).
drivers/usb/core/usb.c: registered new driver audio
drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver
request_module: failed /sbin/modprobe -- sound-service-0-3. error = 256
request_module: failed /sbin/modprobe -- sound-service-0-3. error = 256
request_module: failed /sbin/modprobe -- sound-service-0-3. error = 256
request_module: failed /sbin/modprobe -- sound-service-0-3. error = 256
request_module: failed /sbin/modprobe -- sound-service-0-3. error = 256
request_module: failed /sbin/modprobe -- sound-service-0-3. error = 256
request_module: failed /sbin/modprobe -- sound-service-0-3. error = 256
request_module: failed /sbin/modprobe -- sound-service-0-3. error = 256
hdg: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
request_module: failed /sbin/modprobe -- block-major-11-0. error = 256
request_module: failed /sbin/modprobe -- block-major-11-0. error = 256
cdrom: This disc doesn't have any tracks I recognize!
request_module: failed /sbin/modprobe -- sound-service-0-0. error = 256
request_module: failed /sbin/modprobe -- sound-service-0-3. error = 256
request_module: failed /sbin/modprobe -- sound-service-0-3. error = 256
[EMAIL PROTECTED] skb]$
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
