Just maybe you have the same problem I have. Wiggle your card and see if that causes it. My slot seems to have a loose connection and eny card that hangs out like a USB or wireless gets bumped and cuases lockups. I just can't be without my box long enough for Dell to fix it :)
Eugene Nine ---------- Original Message ---------------------------------- From: "David A. Desrosiers" <[EMAIL PROTECTED]> Date: Fri, 30 Jan 2004 13:00:51 -0500 (EST) > >> I just tested the ehci_hcd driver under 2.6, and now it seems to >> recognize the drive, and I can read/write data to it. I'll do some speed >> timings and get back with the results. It was slower than writing over >> 9600 serial before, but maybe this will help. > > I'm still getting random, hard-to-reproduce machine lockups though. >Not even a kernel oops, just a complete machine seizure, that requires >holding down the power button for 7 seconds to power off; no SysRq, no nmi, >no hangcheck, nothing. > > I'll try to figure out why and post back. > >d. > > > >------------------------------------------------------- >The SF.Net email is sponsored by EclipseCon 2004 >Premiere Conference on Open Tools Development and Integration >See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. >http://www.eclipsecon.org/osdn >_______________________________________________ >[EMAIL PROTECTED] >To unsubscribe, use the last form field at: >https://lists.sourceforge.net/lists/listinfo/linux-usb-devel > ________________________________________________________________ Sent via the HostPortal WebMail system at ninefamily.com ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
