> Duncan: > > Back last fall you mentioned something about needing to add a workaround > to the UHCI driver's port reset code for VIA hardware. It had to do with > making sure the controller was suspended before doing the reset. Can you > remember the details? Is it still needed? > > Alan Stern
I found the original note: http://marc.theaimsgroup.com/?l=linux-usb-devel&m=103558608916467&w=2 I'd be really interested to know if this could affect device hot connect. I have a joystick that works if it's connected to the machine at boot, but not if it's hot connected. The joystick device is created, but the data reports don't change. ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
