On Tue, 10 Feb 2004, Glenn Burkhardt wrote: > > Duncan: > > > > Back last fall you mentioned something about needing to add a workaround > > to the UHCI driver's port reset code for VIA hardware. It had to do with > > making sure the controller was suspended before doing the reset. Can you > > remember the details? Is it still needed? > > > > Alan Stern > > I found the original note: > > http://marc.theaimsgroup.com/?l=linux-usb-devel&m=103558608916467&w=2 > > I'd be really interested to know if this could affect device hot connect. > I have a joystick that works if it's connected to the machine at boot, but not > if it's hot connected. The joystick device is created, but the data reports > don't change.
The symptoms don't match. According to what Duncan wrote, hot-plugging the joystick would cause the joystick to work okay but everything else connected to the same USB controller would either stop working or be reset. Alan Stern ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
